Philips DMR-EH55 Sound No sound, Low volume, Distorted sound, Cannot hear the desired audio, Type

Page 69

Sound

 

 

 

Page

 

No sound.

≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the

14–16,

 

Low volume.

 

amplifier if you have connected one.

60

 

Distorted sound.

≥Press [AUDIO] to select the audio.

30

 

Cannot hear the desired audio

≥Turn off V.S.S. in the following cases.

37

 

type.

 

–When using discs that do not have surround sound effects such as Karaoke discs.

 

 

 

 

–When playing bilingual broadcast programmes.

 

guide

 

 

jacket.

—

 

≥[DVD-A]The disc may have a restriction on the method of audio output. When playing multi-

 

 

 

channel DVD-Audio, only audio for the two front channels will be output. Refer to the disc’s

 

Troubleshooting

 

≥Audio may not be output due to how files were created. (DivX)

—

 

 

 

≥If recording to the HDD or a DVD-RAM when “Rec for High Speed Copy” is set to “On”, you

22

 

 

 

can only record either the main or secondary audio of a bilingual broadcast.

 

 

 

 

If you do not intend to copy the title to a DVD-R, DVD-R DL, DVD-RW (DVD-Video format),

 

 

 

 

+R, +R DL or +RW set “Rec for High Speed Copy” in the Setup menu to “Off”.

 

 

Cannot switch audio.

≥You cannot switch the audio in the following cases.

 

 

 

 

–When a DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW disc is in the

—

 

 

 

disc tray while DVD drive is selected.

 

 

 

 

–When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM”.

60

 

 

 

–When “Rec for High Speed Copy” is set to “On”.

22

 

 

≥When connecting an amplifier using an optical digital cable, you cannot switch the audio if

16, 60

 

 

 

“Dolby Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using audio

 

 

 

 

cables.

 

 

 

≥There are discs for which audio cannot be changed because of how the disc was created.

—

 

 

 

 

 

 

 

Operation

 

 

 

 

 

 

 

 

 

 

 

Cannot operate the television.

≥Change the manufacturer code. Some televisions cannot be operated even if you change the

19

 

The remote control doesn’t work.

 

code.

 

 

 

≥The remote control and main unit are using different codes. Change the code on the remote

19

 

 

 

control.

 

 

 

 

 

Press and hold [ENTER] and the indicated number button at the same

 

 

 

 

 

 

 

 

 

 

time for more than 2 seconds.

 

 

 

≥The batteries are depleted. Replace them with new ones.

11

 

 

≥You are not pointing the remote control at the main unit’s remote control signal sensor during

—

 

 

 

operation.

 

 

 

≥Coloured glass may obstruct the signal reception/transmission.

—

 

 

≥Don’t place the signal sensor in direct sunlight or in areas that may be subject to sunlight

—

 

 

 

exposure.

 

 

 

≥It may be necessary to set the code on the remote control again after changing the batteries.

19

 

 

≥It may be necessary to set the manufacturer code again after changing the batteries.

19

 

 

≥The child lock function is activated.

57

 

The unit is on but cannot be

≥Recording drive or playback drive has not been selected properly.

20, 28

 

operated.

≥Some operations may be prohibited by the disc.

—

 

 

≥The unit is hot (“U59” appears on the display). Wait for “U59” to disappear.

—

 

 

≥One of the unit’s safety devices may have been activated.

—

 

 

 

Reset the unit as follows:

 

 

 

 

1 Press [Í/I] on the main unit to switch the unit to standby.

 

 

 

 

If the unit doesn’t switch to standby, press and hold [Í/I] on the main unit for about 10

 

 

 

 

seconds. The unit is forcibly switched to standby.

 

 

 

 

Alternatively, disconnect the AC mains lead, wait one minute, then reconnect it.

 

 

 

 

2 Press [Í/I] on the main unit to switch it on. If the unit still cannot be operated, consult the

 

 

 

 

dealer.

 

 

 

 

 

 

 

 

HDD activation is slow.

≥The HDD is in SLEEP mode. (“SLEEP” appears in the unit’s display.)

9

 

Cannot eject disc.

≥The unit is recording.

—

 

 

≥The unit may have a problem. While the unit is off, press and hold [∫] and [CH W] on the

 

 

 

 

main unit at the same time for about 5 seconds. Remove the disc and consult the dealer.

 

 

 

 

If the Child Lock function is activated, above operation does not work. Cancel the Child Lock

57

 

 

 

function.

 

 

 

 

 

 

 

 

Cannot tune channels.

≥Check the connections.

14, 15

 

Startup is slow.

≥Make sure that “Quick Start” is set to “On”.

61

 

 

≥Startup takes time in the following situations:

—

 

 

 

–A disc other than a DVD-RAM is inserted.

 

 

 

 

–The clock is not set.

 

 

 

 

–Immediately after a power failure or the AC mains lead is connected.

 

 

 

 

–For a few minutes after 5:15 am due to system maintenance of this unit.

 

 

 

 

 

 

 

 

Takes time to read DVD-RAM.

≥It may take time to read a disc if it is being used for the first time in this unit or it has not been

—

 

 

 

used for a long time.

 

 

 

 

 

 

 

 

RQT8361

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents ForAustraliaandN.Z Illustration shows the model for Australia and N.Z≥The region number of this unit is ExampleHow to replace the fuse If you see this symbolBefore use ForAsiaandMiddleEastTable of contents HDD and discs you can use for recording and play HDD, disc and card informationDVD Video Recording format DVD-Video formatHDD, disc and card information +R/+RW Video Recording formatRecording modes and approximate recording times +R DLPlay-only discs 12 cm/8 cm Discs that cannot be playedHDD, disc and card information Suitable SD Memory Cards Cards you can use on this unitStructure of folders displayed by this unit TypeImportant notes for recording HDD Hard disk drive handling care Disk drive handling careImportant notes for recording/HDD Hard Unit care Disc and card handlingRemote control information Included accessoriesBatteries Use Disc and cardControl reference guide Remote controlAustraliaandN.Z ForAustraliaandN.Z. Show G-CODEscreenUnit’s display Main unitControl reference guide Opening the front panelConnecting a television When the unit is not to be used for a long timeMake sure to use the pair of supplied RF coaxial cables Connection Connecting a television and VCRConnecting a stereo amplifier Connecting an amplifier with a digital input TerminalOther connections ConnectionPress Enter when you have Press 3, 4 to change the settingFinished the settings Press 2, 1 to select the item you Want to changePress 3, 4 to select Progressive and press Enter Press 3, 4 to select Connection and pressPress 3, 4 to select On and press Enter To enjoy progressive videoSet up to match your television and remote control When the following indicator appears on the unit’s displayTelevision operation Test by turning on the television and changing channelsPress Drive Select to select the HDD or DVD drive Recording television programmesPress W X CH to select the channel Press ¥ REC to start recordingRecording television programmes Disc Insertion/EjectionTo finalize the disc To open the tray without disc finalizationTo specify a time to stop recording- One Touch Recording Recording settings for High Speed CopyRecording television programmes Press ¥ REC on the main unit to select the recording timePress F Rec Flexible RecordingPress 3, 4, 2, 1 to select Start and press Enter Playing while you are recordingUsing G-CODEsystem to make timer recordings Timer recordingPress G-Code Press the numbered buttons to enter the G-CODEnumberManually programming timer recordings Timer recordingPress PROG/CHECK Timer recording To cancel recording when recording has already begunPress Drive Select to select the recording drive and press Press 2, 1 to select Stop Recording and press EnterCheck, change or delete a programme Relief RecordingAuto Renewal Recording Playing recorded video contents/Playing play-only discs Operations during play Playing recorded video contents/Playing play-only discsManual Skip Changing audio during playPress Audio Playing DivX discs, MP3 discs and still pictures JPEG/TIFF Playing recorded video contents/PlayingDivX discs, MP3 discs and still pictures JPEG/TIFF Play-only discs/PlayingPlaying DivX discs Selecting file type to playPress Direct Navigator Press 3, 4 to select the title and press EnterPress 3, 4 to select the track and press Enter Playing MP3 discsStill pictures Playing DivX discs, MP3 discsPress 3, 4, 2, 1 to select the album and press Enter Playing still picturesPress Drive Select to select the HDD, DVD or SD drive Go to stepUseful functions during still picture play Slide Show SettingStart Slide Show RotateUsing on-screen menus Using on-screen menus/Status messageCommon procedures Disc menu-Setting the disc contentPress Status Status messagesEditing titles/chapters and playing chapters Editing titles/chaptersPress 3, 4, 2, 1 to select the chapter If you select Chapter ViewTitle operations Partial DeleteChapter operations Press 2, 1 to select the source title and press Creating, editing and playing playlistsCreating playlists Press ReturnPlaylist operations Editing and playing playlists/chaptersAdd Chapter MoveEditing still pictures Press B to select PicturePress 3, 4 to select the operation and press Enter Press 2, 1 to select Delete and press Enter Album and picture operationPress 2, 1 to select number of print 0 to 9 Editing still picturesDeleting titles or pictures during play Delete NavigatorPress Delete Available disc space after deletingCopying titles or playlists Approximate copying times Max. speedDelete Navigator/Copying titles or playlists Copy Press 3, 4 to select Copy and press EnterPress 2, 1 to select Start and press Enter Copying using the copying list- Advanced Copy To return to the previous screen To stop copyingRecording and playing while copying To edit the copying listSet Copy Time Setting the unit to copy according to the set timeCopying MPEG2 moving pictures from an SD card MPEG2VIDEO§ HDD DVD-RAMCopying still pictures Copying using the copying listRegister still pictures for copy To register individual still picturesPress 3, 4 to select To Others Copying all the still pictures on a card- Copy All PicturesPictures and press Enter Press 3, 4 to select Copy AllPress ¥ REC Copying from a video cassette recorderDV automatic recording DV Auto Rec Manual recordingSetting the protection Common proceduresHDD, disc and card management Providing a name for a discDeleting all titles and playlists-Delete all titles Deleting all the contents of a disc or card-FormatEnabling discs to be played on other equipment-Finalize Selecting the background style-Top MenuCreating Top Menu-Create Top Menu HDD, disc and card managementShow Enter Name screen Entering textPress 3, 4, 2, 1 to select a character and press Enter Press SetChild Lock Functions windowPress 3, 4 to select an item and press Enter Entering text/FUNCTIONS window/Child LockChanging the unit’s settings OPEN/CLOSETabs Menus Options Changing the unit’s settings Summary of settingsDisc PictureChanging the unit’s settings DTSMpeg Others Tabs Menus Options Underlined items are the factory presetsTuning Press 3, 4 to select Tuning and pressPress 3, 4 to select Manual and press Enter TV System Clock Settings Press Enter when you have finished the settingsClock starts On the television MessagesMessages On the unit’s display Set up Frequently asked questionsCover Can I record from a commerciallyTroubleshooting guide Cannot switch audio 14-16 Low volumeSound No sound Distorted soundTroubleshooting guide Troubleshooting guide To reset this unit To return all the settings other Copying, deleting and settingPreset To reset the ratings levelTroubleshooting guide/Glossary GlossaryRGB Specifications Safety precautions Index
Top Page Image Contents