Philips DMR-EH55 operating instructions Safety precautions

Page 75

Safety precautions

Placement

Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit and cause a fire.

Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric shock.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS 2.0iDigital Out” are trademarks of Digital Theater Systems, Inc.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited consumer uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

≥miniSDTM is a trademark of SD Card Association.

≥SD logo is a trademark.

≥Portions of this product are protected under copyright law and are provided under license by ARIS/SOLANA/4C.

Official DivX Certified™ product.

Plays DivX® 5, DivX® 4, DivX® 3, and DivX® VOD video content (in compliance with DivX Certified™ technical requirements).

DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc. and are used under license.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service centre. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.

Specifications/Safety precautions

RQT8361

75

Page 74 Page 76
Image 75
Page 74 Page 76
Contents Example Illustration shows the model for Australia and N.ZForAustraliaandN.Z ≥The region number of this unit isForAsiaandMiddleEast If you see this symbolHow to replace the fuse Before useTable of contents DVD-Video format HDD, disc and card informationHDD and discs you can use for recording and play DVD Video Recording format+R DL +R/+RW Video Recording formatHDD, disc and card information Recording modes and approximate recording timesPlay-only discs 12 cm/8 cm Discs that cannot be playedHDD, disc and card information Type Cards you can use on this unitSuitable SD Memory Cards Structure of folders displayed by this unitImportant notes for recording HDD Hard disk drive handling care Disk drive handling careImportant notes for recording/HDD Hard Unit care Disc and card handlingDisc and card Included accessoriesRemote control information Batteries UseForAustraliaandN.Z. Show G-CODEscreen Remote controlControl reference guide AustraliaandN.ZOpening the front panel Main unitUnit’s display Control reference guideConnecting a television When the unit is not to be used for a long timeMake sure to use the pair of supplied RF coaxial cables Connection Connecting a television and VCRConnection Connecting an amplifier with a digital input TerminalConnecting a stereo amplifier Other connectionsPress 2, 1 to select the item you Want to change Press 3, 4 to change the settingPress Enter when you have Finished the settingsTo enjoy progressive video Press 3, 4 to select Connection and pressPress 3, 4 to select Progressive and press Enter Press 3, 4 to select On and press EnterTest by turning on the television and changing channels When the following indicator appears on the unit’s displaySet up to match your television and remote control Television operationPress ¥ REC to start recording Recording television programmesPress Drive Select to select the HDD or DVD drive Press W X CH to select the channelTo open the tray without disc finalization Disc Insertion/EjectionRecording television programmes To finalize the discPress ¥ REC on the main unit to select the recording time Recording settings for High Speed CopyTo specify a time to stop recording- One Touch Recording Recording television programmesPlaying while you are recording Flexible RecordingPress F Rec Press 3, 4, 2, 1 to select Start and press EnterPress the numbered buttons to enter the G-CODEnumber Timer recordingUsing G-CODEsystem to make timer recordings Press G-CodeManually programming timer recordings Timer recordingPress PROG/CHECK Press 2, 1 to select Stop Recording and press Enter To cancel recording when recording has already begunTimer recording Press Drive Select to select the recording drive and pressCheck, change or delete a programme Relief RecordingAuto Renewal Recording Playing recorded video contents/Playing play-only discs Operations during play Playing recorded video contents/Playing play-only discsManual Skip Changing audio during playPress Audio Play-only discs/Playing Playing recorded video contents/PlayingPlaying DivX discs, MP3 discs and still pictures JPEG/TIFF DivX discs, MP3 discs and still pictures JPEG/TIFFPress 3, 4 to select the title and press Enter Selecting file type to playPlaying DivX discs Press Direct NavigatorPlaying DivX discs, MP3 discs Playing MP3 discsPress 3, 4 to select the track and press Enter Still picturesGo to step Playing still picturesPress 3, 4, 2, 1 to select the album and press Enter Press Drive Select to select the HDD, DVD or SD driveRotate Slide Show SettingUseful functions during still picture play Start Slide ShowDisc menu-Setting the disc content Using on-screen menus/Status messageUsing on-screen menus Common proceduresPress Status Status messagesIf you select Chapter View Editing titles/chaptersEditing titles/chapters and playing chapters Press 3, 4, 2, 1 to select the chapterTitle operations Partial DeleteChapter operations Press Return Creating, editing and playing playlistsPress 2, 1 to select the source title and press Creating playlistsChapter Move Editing and playing playlists/chaptersPlaylist operations AddEditing still pictures Press B to select PicturePress 3, 4 to select the operation and press Enter Editing still pictures Album and picture operationPress 2, 1 to select Delete and press Enter Press 2, 1 to select number of print 0 to 9Available disc space after deleting Delete NavigatorDeleting titles or pictures during play Press DeleteCopying titles or playlists Approximate copying times Max. speedDelete Navigator/Copying titles or playlists Copy Press 3, 4 to select Copy and press EnterPress 2, 1 to select Start and press Enter Copying using the copying list- Advanced Copy To edit the copying list To stop copyingTo return to the previous screen Recording and playing while copyingMPEG2VIDEO§ HDD DVD-RAM Setting the unit to copy according to the set timeSet Copy Time Copying MPEG2 moving pictures from an SD cardTo register individual still pictures Copying using the copying listCopying still pictures Register still pictures for copyPress 3, 4 to select Copy All Copying all the still pictures on a card- Copy All PicturesPress 3, 4 to select To Others Pictures and press EnterManual recording Copying from a video cassette recorderPress ¥ REC DV automatic recording DV Auto RecProviding a name for a disc Common proceduresSetting the protection HDD, disc and card managementDeleting all titles and playlists-Delete all titles Deleting all the contents of a disc or card-FormatHDD, disc and card management Selecting the background style-Top MenuEnabling discs to be played on other equipment-Finalize Creating Top Menu-Create Top MenuPress Set Entering textShow Enter Name screen Press 3, 4, 2, 1 to select a character and press EnterEntering text/FUNCTIONS window/Child Lock Functions windowChild Lock Press 3, 4 to select an item and press EnterChanging the unit’s settings OPEN/CLOSETabs Menus Options Picture Summary of settingsChanging the unit’s settings DiscChanging the unit’s settings DTSMpeg Others Tabs Menus Options Underlined items are the factory presetsTuning Press 3, 4 to select Tuning and pressPress 3, 4 to select Manual and press Enter TV System Clock Settings Press Enter when you have finished the settingsClock starts On the television MessagesMessages On the unit’s display Can I record from a commercially Frequently asked questionsSet up CoverTroubleshooting guide Distorted sound 14-16 Low volumeCannot switch audio Sound No soundTroubleshooting guide Troubleshooting guide To reset the ratings level Copying, deleting and settingTo reset this unit To return all the settings other PresetTroubleshooting guide/Glossary GlossaryRGB Specifications Safety precautions Index
Top Page Image Contents