Philips DMR-EH55 Still pictures Cannot display Direct Navigator, Be read, Preset, Settings

Page 72

Troubleshooting guide

Still pictures

Cannot display Direct Navigator	≥This screen cannot be displayed during recording or copy.	—
screen.

Cannot edit or format a card.	≥Release the card’s protection setting. (With some cards, the “Write Protection Off” message	53
	sometimes appears on the screen even when protection has been set.)

The contents of the card cannot	≥The card format is not compatible with the unit. (The contents on the card may be damaged.)	7, 31
be read.	Format using FAT 12 or FAT 16 with other equipment or format the card with this unit.	54
	≥The card contains a folder structure and/or file extensions that are not compatible with this	7
	unit.	—
	≥Turn off and then turn on the unit again.	—
	≥You can use SD Memory Cards with capacities from 8 MB to 2 GB.	—

Copying, deleting and setting	≥When there are a lot of folders and files, it may sometimes take a few hours.	—
protection takes a long time.	≥When repeating copying or deleting, it may sometimes take a long time. Format the disc or	54
	card.

To reset this unit

To return all the settings other	≥Select “Yes” in “Shipping Condition” in the Setup menu. All the settings except for the ratings	61
than the main ones to the factory	level, ratings password and time settings return to the factory preset. The timer recording
preset	programmes are also cancelled.	61
	≥Select “Yes” in “Default Settings” in the Setup menu. All the settings other than the	61
	programmed channels, time settings, country settings§, disc language settings, ratings level,
	ratings password, remote control code, return to the factory presets.	—
	≥Press and hold [X CH] and [CH W] on the main unit until the Country setting screen§ or the	—
	Auto-Setup screen appears. All the settings except for the ratings level, ratings password and
	time settings return to the factory preset. The timer recording programmes are also
	cancelled.
	§ Only for Australia and N.Z.
To reset the ratings level	≥While the disc tray is open, press [DRIVE SELECT] to select the DVD drive, then press and	—
settings	hold [¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more seconds.

To restore the unit if it freezes	≥Press and hold [Í/I] on the main unit for 10 seconds. (The settings remain.)	—
due to one of the safety devices
being activated

RQT8361

72

Image 72

Contents Illustration shows the model for Australia and N.Z ForAustraliaandN.Z≥The region number of this unit is ExampleIf you see this symbol How to replace the fuseBefore use ForAsiaandMiddleEastTable of contents HDD, disc and card information HDD and discs you can use for recording and playDVD Video Recording format DVD-Video format+R/+RW Video Recording format HDD, disc and card informationRecording modes and approximate recording times +R DLPlay-only discs 12 cm/8 cm Discs that cannot be playedHDD, disc and card information Cards you can use on this unit Suitable SD Memory CardsStructure of folders displayed by this unit TypeImportant notes for recording HDD Hard disk drive handling care Disk drive handling careImportant notes for recording/HDD Hard Disc and card handling Unit careIncluded accessories Remote control informationBatteries Use Disc and cardRemote control Control reference guideAustraliaandN.Z ForAustraliaandN.Z. Show G-CODEscreenMain unit Unit’s displayControl reference guide Opening the front panelConnecting a television When the unit is not to be used for a long timeMake sure to use the pair of supplied RF coaxial cables Connecting a television and VCR ConnectionConnecting an amplifier with a digital input Terminal Connecting a stereo amplifierOther connections ConnectionPress 3, 4 to change the setting Press Enter when you haveFinished the settings Press 2, 1 to select the item you Want to changePress 3, 4 to select Connection and press Press 3, 4 to select Progressive and press EnterPress 3, 4 to select On and press Enter To enjoy progressive videoWhen the following indicator appears on the unit’s display Set up to match your television and remote controlTelevision operation Test by turning on the television and changing channelsRecording television programmes Press Drive Select to select the HDD or DVD drivePress W X CH to select the channel Press ¥ REC to start recordingDisc Insertion/Ejection Recording television programmesTo finalize the disc To open the tray without disc finalizationRecording settings for High Speed Copy To specify a time to stop recording- One Touch RecordingRecording television programmes Press ¥ REC on the main unit to select the recording timeFlexible Recording Press F RecPress 3, 4, 2, 1 to select Start and press Enter Playing while you are recordingTimer recording Using G-CODEsystem to make timer recordingsPress G-Code Press the numbered buttons to enter the G-CODEnumberManually programming timer recordings Timer recordingPress PROG/CHECK To cancel recording when recording has already begun Timer recordingPress Drive Select to select the recording drive and press Press 2, 1 to select Stop Recording and press EnterCheck, change or delete a programme Relief RecordingAuto Renewal Recording Playing recorded video contents/Playing play-only discs Playing recorded video contents/Playing play-only discs Operations during playManual Skip Changing audio during playPress Audio Playing recorded video contents/Playing Playing DivX discs, MP3 discs and still pictures JPEG/TIFFDivX discs, MP3 discs and still pictures JPEG/TIFF Play-only discs/PlayingSelecting file type to play Playing DivX discsPress Direct Navigator Press 3, 4 to select the title and press EnterPlaying MP3 discs Press 3, 4 to select the track and press EnterStill pictures Playing DivX discs, MP3 discsPlaying still pictures Press 3, 4, 2, 1 to select the album and press EnterPress Drive Select to select the HDD, DVD or SD drive Go to stepSlide Show Setting Useful functions during still picture playStart Slide Show RotateUsing on-screen menus/Status message Using on-screen menusCommon procedures Disc menu-Setting the disc contentStatus messages Press StatusEditing titles/chapters Editing titles/chapters and playing chaptersPress 3, 4, 2, 1 to select the chapter If you select Chapter ViewTitle operations Partial DeleteChapter operations Creating, editing and playing playlists Press 2, 1 to select the source title and pressCreating playlists Press ReturnEditing and playing playlists/chapters Playlist operationsAdd Chapter MoveEditing still pictures Press B to select PicturePress 3, 4 to select the operation and press Enter Album and picture operation Press 2, 1 to select Delete and press EnterPress 2, 1 to select number of print 0 to 9 Editing still picturesDelete Navigator Deleting titles or pictures during playPress Delete Available disc space after deletingCopying titles or playlists Approximate copying times Max. speedDelete Navigator/Copying titles or playlists Copy Press 3, 4 to select Copy and press EnterPress 2, 1 to select Start and press Enter Copying using the copying list- Advanced Copy To stop copying To return to the previous screenRecording and playing while copying To edit the copying listSetting the unit to copy according to the set time Set Copy TimeCopying MPEG2 moving pictures from an SD card MPEG2VIDEO§ HDD DVD-RAMCopying using the copying list Copying still picturesRegister still pictures for copy To register individual still picturesCopying all the still pictures on a card- Copy All Pictures Press 3, 4 to select To OthersPictures and press Enter Press 3, 4 to select Copy AllCopying from a video cassette recorder Press ¥ RECDV automatic recording DV Auto Rec Manual recordingCommon procedures Setting the protectionHDD, disc and card management Providing a name for a discDeleting all the contents of a disc or card-Format Deleting all titles and playlists-Delete all titlesSelecting the background style-Top Menu Enabling discs to be played on other equipment-FinalizeCreating Top Menu-Create Top Menu HDD, disc and card managementEntering text Show Enter Name screenPress 3, 4, 2, 1 to select a character and press Enter Press SetFunctions window Child LockPress 3, 4 to select an item and press Enter Entering text/FUNCTIONS window/Child LockChanging the unit’s settings OPEN/CLOSETabs Menus Options Summary of settings Changing the unit’s settingsDisc PictureChanging the unit’s settings DTSMpeg Tabs Menus Options Underlined items are the factory presets OthersTuning Press 3, 4 to select Tuning and pressPress 3, 4 to select Manual and press Enter TV System Clock Settings Press Enter when you have finished the settingsClock starts Messages On the televisionMessages On the unit’s display Frequently asked questions Set upCover Can I record from a commerciallyTroubleshooting guide 14-16 Low volume Cannot switch audioSound No sound Distorted soundTroubleshooting guide Troubleshooting guide Copying, deleting and setting To reset this unit To return all the settings otherPreset To reset the ratings levelTroubleshooting guide/Glossary GlossaryRGB Specifications Safety precautions Index