Philips DVDR 725H/05 manual Programming recordings with the Video PLus+ System, Activate VPS/PDC

Programming a recording (TIMER)

Programming recordings with the VIDEO PLus+® System

Thanks to this programming system, you no longer need to tediously enter the date, programme number, start and finish times. All the information needed by the DVD recorder for programming is contained in the PlusCode programming number. This 9-digit PlusCode number is found in most TV listing magazines.

1Switch on the TV. If required, select the programme number for the DVD recorder.

2Press TIMER s 7 on the remote control. P The 'Schedule' screen will appear

3Press the red function button ('VIDEO Plus+')D .

VIDEO Plus+ Manual Home

Please enter the PlusCode programming number and press OK to confirm.

= = = = = = = = =

Grid Search Schedule Info

No programmes

Once 0

a'VIDEO Plus+ system' appears on the screen

bThis message appears when the TV channel has not been assigned yet.

Enter the programme number you wish to record from and confirm using OK L .

aThe following message appears on the screen: 'PlusCode number wrong'

bThe entered PlusCode number is incorrect. Repeat the entry or end with TIMER s 7 .

b Check time/date (see chapter 'Installing your DVD recorder', section 'Setting the time & date').

VIDEO Plus+ Manual Home

Please enter the PlusCode programming number and press OK to confirm.

1 2 3 4 5 = = = =

Grid		Search		Schedule	Info
/Record					Freq. Timing
21-Oct	20:00 21:30		BBC1		Once 0

4Enter the entire PlusCode number. This number is up to 9 digits long and can be found next to the start time of the TV programme in your TV listings magazine.

e.g.: 5-234-89 or 5,234 89

Enter 523489 for the PlusCode-number.

Use therefore the number buttons 0..9 on the remote control. If you make a mistake you can press D K or the green action button to go back a position.

5Confirm with OK L .

PThe decoded data appears after confirmation.

You can use the colour buttons to make the following settings. First, the right tile must be highlighted ( C M button). Check the functions (descriptions) in the corresponding colour field before pressing a button.

Activate 'VPS/PDC'

Keep pressing the yellow action button until 'VPS/PDC' appears instead of the time.

Setting up repeat recordings

You can choose from the following settings with the green action button:

'Frequency': 'Once': single recordings

'M-F': Repeated daily recordings (Monday to Friday).

'Mon': Repeated weekly recordings (every week on the same day e.g. Monday).

6If all information is correct, press the OK L button. The data is stored.

7To end, press TIMER s 7 .

If one or more recordings have been programmed 'TIMER' will light up on the display.

65