Philips DVDR 725H/05 manual Manual programmed recordings

Programming a recording (TIMER)

Manual programmed recordings

Preparation:

•) Switch on the TV, and if necessary, select the programme number for the DVD recorder.

•) Switch on the DVD recorder.

1Press TIMER s 7 on the remote control. P The 'Schedule' screen appears.

aI will see some information about the GUIDE Plus+ ® System

bThe GUIDE Plus+® System was not installed yet. Read therefore in the chapter 'The GUIDE Plus+® System' the section 'Set up the GUIDE Plus+® System'.

8Enter the programme number of the TV channel using the number buttons 0..9 .

		Frequency		VPS/PDC	Home
,
Grid		Search		Schedule	Info
/Record					Freq. Timing
21-Oct	20:00 21:30		BBC1		Once +0

ENGLISH

VIDEO Plus+ Manual Home

Schedule displays programmes for Record. Press Bto use. Press the Red button for VIDEO Plus+ recording. Press the Green button for Manual recording. Press Dfor Search. Press Cfor Info.

Grid Search Schedule Info

No programmes

2Press the green buttonE .

P The current date will be displayed.

3Enter the date using the number buttons 0..9 .

4Confirm with OK L .

How can I correct wrong entries?

If you have already confirmed the entry with OK L , you can select one of the following functions:

Repeat entry: Green colour button E

Cancel: Red colour button D

5Enter the start time for the show using the number buttons 0..9 . Confirm with OK L .

6Enter the finish time for the TV show using the number buttons 0..9 Confirm with OK L .

7Check the data you entered.

O If necessary, go back a position to change entered data using the green function buttonE .

Selecting a TV channel from the listing

You can only use this function if data from the GUIDE Plus+® system is already available.

-Press the yellow function button F . You will see an overview of all channels

-Select the TV channel you want to program using D K , C M , B O , A I . You can browse back or forth using CHANNEL q P , CHANNEL r S .

Programme numbers of the scart sockets 'EXT1' and 'EXT2'

You can also program recordings from external sources.

Control of the recording with 'VPS/PDC' is not possible from the scart sockets.

-Select the corresponding input socket using B O or A I .

'EXT1' ( EXT1 TO TV-I/O N ), 'EXT2' ( EXT2 AUX-I/O M ).

9Confirm with OK L .

Changes using the colour buttons

You can use the colour function buttons to make the following settings. Make sure that the right tile is selected.

'Frequency': Green function button E

'Once': single recordings

'M-F': Repeated daily recordings (Monday to Friday).

'Mon': Repeated weekly recordings (every week on the same day, e.g. Monday).

Activate VPS/PDC ('Timing'): Yellow function button F

Using this button, you can activate (appears) or deactivate ('VPS/PDC' disappears) 'VPS/PDC' in tile 'Timing'

0To end, press TIMER s 7 .

ATo find out how you can go back and change the data, read the section on 'How to change or delete a programmed recording (TIMER)'

If any of the TIMER blocks are in use, 'TIMER' will light up on the recorder display.

66