Philips HDTV user manual Connecting a PC Using RGB or DVI Video Input

Page 18

User Manual BDH5011

7.5Connecting a PC Using RGB or DVI Video Input

1.For most PC’s, connect the 15-pin D-Sub RGB connector from the back of the PC to the RGB-INconnector located on the back of the display. If you have a PC that is equipped with a DVI (Digital Visual Interface), you may connect the PC DVI connector from the back of the PC to the DVI-In connector located on the back of the display.

2.Connect the red (R) and white (L) audio jacks from the PC to the R and L jacks located to the left of the S-VIDEOconnector. If you are using a DVI interface, simply connect the (R) and (L) audio jacks to the R and L jacks located to the left of the VIDEO 1 connector.

Notes:

• Your PC may have audio jacks in the form of a 3.5mm phono plug. If this is the case, you will need to use a phono-plug to RCA converter cable in order to connect audio.

• A RGB loop-out labeled iaRGB OutlB will allow another RGB display to be connected. The RGB loop-out will display the same signal as the RGB In signal source.

• The physical display resolution is a maximum of 1024x768 dots when aspect ratio is set to 4:3 and 1366x768 dots when set to 16:9.

If the PC’s display resolution exceeds these maximums, the display will have to artificially eliminate dots in order to fit within the physical dot capability of the display. Therefore, it is possible that the display may not be able to show details with adequate clarity.

18

Image 18

Contents Philips Business Solutions Table of Contents Important Safety Instructions Risk of Electric Shock do not OpenUnit has been dropped or the cabinet has been damaged FCC Statement FCC Compliance StatementCanadian Compliance Statement Cleaning and Maintenance Front Panel Cleaning InstructionsCabinet Cleaning Instructions Avoid Still Images Side-by-Side Picture POP Product FeaturesHdtv Signal Compatible Digital Zoom ModesDiscrete Power ON/OFF 280x1024 Sxga SupportPackage Contents Optional Accessories Front View Rear ViewRemote Control Swap Menu AdjustmentChannel Up/Down 17 18. PIP PositionUsing Component Video Input Connecting the DisplayConnecting a DVD Player Using S-Video InputUsing RGB Input Connecting a Hdtv Decoder Set-Top BoxConnecting a VCR Using Composite InputUsing the Subwoofer Out Connecting a Subwoofer Connecting External Amplified SpeakersConnecting to an External Amplifier External Audio ConnectionsConnecting a PC Using RGB or DVI Video Input Communications Parameters RS-232 Remote Control ConnectionsRS-232 Serial Terminal Overview Pin Layout for RS-232 TerminalCommand Parameters Cmd Data DetailsBBE Using Front Panel or Remote Control Using Your Display BasicsPowering on / OFF Using Discrete Power ON/OFF ButtonsSelecting Signal Source Using Direct Input Selection ButtonsAdjusting Sound Volume Using MuteUsing with Hdtv Understanding HdtvScan Mode Sdtv Interlaced scan method1Advanced Functions Switch On PIP or POP ModeChanging the Sub-Picture Position in PIP Mode Picture-In-Picture PIP / Side-by-Side Picture POPSwitching Main and Sub-Pictures Swap Changing the Input Source for Sub-PictureChanging the Input Source for Main Picture Accessing PIP and POP Modes using OSD Picture-In-Picture PIP / Side-by-Side Picture POP / ContdPIP Window Position PIP Window Swap Screen Rate Aspect Ratio ControlPOP Window Swap Full Widescreen 169 Aspect Ratio Viewing ModesUnderstanding Widescreen Modes PanoramaFor Widescreen Content ZoomOn-Screen Display OSD Settings Sleep Timer Settings Sleep TimerSleep OFF Audio Output Sound AdjustmentsVariable and Fixed Audio Output VariableBass Switching OFF Built-In SpeakersInner speaker ON/OFF TrebleSignal Frequency Information Display Input H-FREQ KHZInput V-FREQ HZ When Using RGB & DVI Inputs HorFormat Refresh Contrast Picture AdjustmentFor AV/Component Video 480i signal BrightnessTint Color TemperatureClock Phase SharpnessFor Component Video 480p, 720p and 1080i signal Geometric Adjust For Component Video 480p, 720p and 1080i signal Contd For RGB / DVI Clock Phase Troubleshooting Troubleshoot Common ConditionsSpecifications DVI Signal Pin Assignments For D-SUB Connector In/Loop OutPin Assignments For 24 Pin DVI Connector Digital Only Audio SignalRGB/DVI Package Dimensions PB/PR For Component 1 Mode Resolution RateDimensions Without/Stand With/Stand WeightPower Management Emission RequirementPreset Timing Chart Item Description Mode No 72.000 Wall Mount Option Rear ViewWhat is EXCLUDED? Limited WarrantyWhat is COVERED? One Year Free Labor One Year Free PartsWhere is Service AVAILABLE? Make Sure YOU Keep Before Requesting ServiceTo GET Warranty Service If YOU have QuestionsRemember