Philips HDTV Using Your Display Basics, Powering on / OFF, Using Front Panel or Remote Control

Ad

Page 22

User Manual BDH5011

8.USING YOUR DISPLAY - BASICS

POWER (Toggle)

DISCRETE

POWER ON/OFF

8.1Powering ON / OFF

Using Front Panel or Remote Control

1.Make sure the display is plugged into the wall outlet and the main AC switch located at the rear side of the display is switched to ON position. If the power is plugged in and the AC switch is on, the STATUS LED will illuminate solid yellow.

2.Press the POWER button on the front panel or on the remote control.

3.The display will turn on after a brief pause. The STATUS LED will turn green to indicate the power on status.

4.To turn power off, simply press the POWER button on the front panel or on the remote control once again.

Using Discrete Power ON/OFF Buttons

1.The discrete POWER ON/OFF buttons send two discrete signals to the display.

2.To turn power on, simply press the POWER ON button. If the display is already switched on, pressing this button will have no effect.

3.To turn off power, simply press the POWER OFF button. If the display is already switched off, pressing this button will have no effect.

Status LED

•Not Illuminated - No AC Power detected. If the main power switch (rear of panel) is switched off, this LED will not illuminate.

•Solid Yellow - Standby (Power OFF) with AC power detected.The LED will illuminate yellow if the display is switched off while the main power cord is plugged in.

•Solid Green - Power ON

22

Image 22

Contents Philips Business Solutions Table of Contents Important Safety Instructions Risk of Electric Shock do not OpenUnit has been dropped or the cabinet has been damaged FCC Compliance Statement FCC StatementCanadian Compliance Statement Front Panel Cleaning Instructions Cleaning and MaintenanceCabinet Cleaning Instructions Avoid Still Images Side-by-Side Picture POP Product FeaturesHdtv Signal Compatible Digital Zoom ModesDiscrete Power ON/OFF 280x1024 Sxga SupportPackage Contents Optional Accessories Front View Rear ViewRemote Control Swap Menu AdjustmentChannel Up/Down 17 18. PIP PositionUsing Component Video Input Connecting the DisplayConnecting a DVD Player Using S-Video InputUsing RGB Input Connecting a Hdtv Decoder Set-Top BoxConnecting a VCR Using Composite InputUsing the Subwoofer Out Connecting a Subwoofer Connecting External Amplified SpeakersConnecting to an External Amplifier External Audio ConnectionsConnecting a PC Using RGB or DVI Video Input Communications Parameters RS-232 Remote Control ConnectionsRS-232 Serial Terminal Overview Pin Layout for RS-232 TerminalCommand Parameters Cmd Data DetailsBBE Using Front Panel or Remote Control Using Your Display BasicsPowering on / OFF Using Discrete Power ON/OFF ButtonsSelecting Signal Source Using Direct Input Selection ButtonsAdjusting Sound Volume Using MuteUsing with Hdtv Understanding HdtvScan Mode Sdtv Interlaced scan method1Advanced Functions Switch On PIP or POP ModeChanging the Sub-Picture Position in PIP Mode Picture-In-Picture PIP / Side-by-Side Picture POPChanging the Input Source for Sub-Picture Switching Main and Sub-Pictures SwapChanging the Input Source for Main Picture Picture-In-Picture PIP / Side-by-Side Picture POP / Contd Accessing PIP and POP Modes using OSDPIP Window Position Screen Rate Aspect Ratio Control PIP Window SwapPOP Window Swap Full Widescreen 169 Aspect Ratio Viewing ModesUnderstanding Widescreen Modes PanoramaFor Widescreen Content ZoomOn-Screen Display OSD Settings Sleep Timer Sleep Timer SettingsSleep OFF Audio Output Sound AdjustmentsVariable and Fixed Audio Output VariableBass Switching OFF Built-In SpeakersInner speaker ON/OFF TrebleInput H-FREQ KHZ Signal Frequency Information DisplayInput V-FREQ HZ Hor When Using RGB & DVI InputsFormat Refresh Contrast Picture AdjustmentFor AV/Component Video 480i signal BrightnessTint Color TemperatureClock Phase SharpnessFor Component Video 480p, 720p and 1080i signal Geometric Adjust For Component Video 480p, 720p and 1080i signal Contd For RGB / DVI Clock Phase Troubleshooting Troubleshoot Common ConditionsSpecifications DVI Signal Pin Assignments For D-SUB Connector In/Loop OutPin Assignments For 24 Pin DVI Connector Digital Only Audio SignalRGB/DVI Package Dimensions PB/PR For Component 1 Mode Resolution RateDimensions Without/Stand With/Stand WeightPower Management Emission RequirementPreset Timing Chart Item Description Mode No 72.000 Wall Mount Option Rear ViewWhat is EXCLUDED? Limited WarrantyWhat is COVERED? One Year Free Labor One Year Free PartsWhere is Service AVAILABLE? Make Sure YOU Keep Before Requesting ServiceIf YOU have Questions To GET Warranty ServiceRemember