Philips HDTV user manual Variable and Fixed Audio Output, Sound Adjustments

User Manual BDH5011

10.5Variable and Fixed Audio Output

Setting Output Using OSD

You can set the type of output sent from the audio output jack, located on the rear side of the display. By using an OSD based switch, you can easily choose between variable or fixed audio outputs.

To set the audio output setting:

1.Press the MENU +/- buttons on the remote control or the front control panel.

2.Use the ADJ +/- buttons to navigate to SOUND OSD sub-menu.

3.Use the MENU +/- buttons to select the AUDIO OUTPUT option.

4.Use the ADJ +/- buttons to change setting between FIXED or VARIABLE.

AUDIO OUTPUT

Sets the type of audio output sent from the audio output jacks located on the rear side of display.

•VARIABLE

When set to Variable, audio output is affected by the display’s internal audio controls including bass, treble, surround, BBE, bass extension, and volume.

•FIXED

When set to Fixed, the audio output bypasses the display’s internal audio control so that functions such as bass, treble, surround, BBE, bass extension, and volume controls have no effect.

10.6 Sound Adjustments

Sound Adjustments Using OSD

Sound adjustments are available to enhance the sound performance of the display.These adjustments will affect the display’s built-in speakers and the AUDIO OUTPUT jacks when set to ‘Variable’ (see above section).To access sound adjustments:

1.Press the MENU +/- buttons on the remote control or the front control panel.

2.Use the ADJ +/- buttons to navigate to SOUND OSD sub-menu.

3.Use the MENU +/- buttons to select the various options described in this section.

35