Philips PFL35X7H Install analogue channels, Install digital channels, Fine-tune analogue channels

5.Follow the onscreen instructions to select other options, if any.

The start menu for channel search is displayed.

6.Start channel search:

∙If your channel service provider

instructs you to change settings, select [Settings], then press OK. Follow the service provider's instructions to complete the installation.

∙Otherwise, select [Start], then press OK.

7.Once the channel search is complete, select [Finish], then press OK.

Tip: Press LIST to see the channel list.

Note: When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall these channels.

Install analogue channels

You can search and store analogue TV channels one by one.

Step 1: Select your system

Note: Skip this step if your system settings are correct.

1.While you watch TV, press .

2.Select [Setup] > [Channel settings] >

[Channel installation].

3.Select [Analogue: Manual antenna installation] > [System], then press OK.

4.Select the system for your country or region, then press OK.

Step 2: Search and store new TV channels

1.In the [Analogue: Manual antenna installation] menu, select [Find channel], then press OK.

2.Find the channel:

∙If you know the channel frequency, enter it with the Navigation buttons or Numeric buttons.

∙If you do not know the channel frequency, search for the next

frequency that has a strong signal. Select [Search], and then press OK.

3. After you have found the correct channel,
select [Done], then press OK.	English
4. Select [Store as new channel], then press
OK to store the new TV channel.
Note: If the reception is poor, reposition
your antenna and repeat the procedure.

Install digital channels

If you know the channel frequency of the channels you want to install, you can search and store digital channels one-by-one. For best results, contact the service provider.

1. Press .

2.Select [Setup] > [Channel settings] > [Channel installation].

3.Select [Digital: Reception test] > [Find channel], then press OK.

4.Press the Numeric buttons to enter the

channel frequency.

5.Select [Search], then press OK.

6.When the channel is found, select [Store], then press OK.

7. Press to exit.

Note: If your cable provider does not

provide you with a specific symbol rate value for DVB-C channels, select [Automatic] in

[Symbol rate mode].

Fine-tune analogue channels

If the reception of an analogue TV channel is poor, you can fine-tune the TV channel.

1. Press .

2.Select [Setup] > [Channel settings] > [Channel installation].

3.Select [Analogue: Manual antenna installation] > [Fine tune], and then press OK.

4. Press or to fine-tune the channel.

5.When you have selected the correct channel frequency, select [Done], and then press OK.

6.Select an option, then press OK.

∙[Store current channel]: Store the channel as the current channel number.

∙[Store as new channel]: Store the channel as a new channel number.

EN 27