Philips PFL30X7H, PFL38X7H Scan for routers, If prompted, agree to the End User Licence Agreement

Start wireless setup

1.Switch on your wireless network router.

2.Connect the Philips USB adapter PTA01 to a USB connector on the TV.

The wireless installation starts automatically.

3.Follow the onscreen instructions.

Tip: Keep the wireless USB adapter connected to the TV.

WPS - Wi-Fi Protected Setup

1.If your router supports WPS (WiFi Protected Setup), press the WPS button on the router.

2.After 2 minutes, select [WPS] on the TV, then press OK.

The TV connects to your network. This takes about 2 minutes.

Most new wireless routers have the WPS system and carry the WPS logo. The WPS system uses WPS security encryption and cannot be combined with devices on your network that use the WEP (Wired Equivalent Privacy) security encryption.

If you still need the WEP devices in your network, install with [Scan] > [Custom].

Scan for routers

If you have several routers in your network, you can select the network you need.

1.To select a specific network router, press [Scan] on the first page of the installation. The routers with WPS and the strongest signal are shown first in the list on screen.

2.Select the router you need, then press OK.

∙If you are connecting to a WPS router, select [WPS] on the TV.

∙If you want to set the PIN code in your

router software to connect, select [WPS pin] and note down the code.

∙To enter the encryption key manually, select [Standard] and enter the key when prompted.

Set secured connection with WPS encryption

1.To set the secured connection with a PIN code, select the [WPS pin] and press OK.

2.Write down the 8-digit PIN code shown on TV and enter it in the router software on your PC.

See the router manual for where to enter the PIN code.

Set secured connection with WPA encryption

If your router has WPA (WiFi Protected Access) security, enter the pass phrase with the remote control.

1.To enter the encryption key manually, select [Standard] and press OK.

2.To access the onscreen keyboard, select the text entry field, then press OK.

Set secured connection with WEP encryption

If your router has WEP security, the TV asks for the WEP encryption key in hexadecimal numbers.

1.Locate the hexadecimal key in the router software on your PC and make a note of of the first key in the WEP keys list.

2.Enter the security key on the TV with the remote control to connect to the router.

3.If prompted, agree to the End User Licence Agreement.

EN 46