Philips 32PFL5406H, 32PFL4606H, 37PFL4606H Manually adjust picture settings, Change picture format

Manually adjust picture settings

1Press .

2Select [Setup] > [TV settings] > [Picture], then press OK.

3Select one of the following settings, then press OK.

[Smart picture] picture settings.

[Reset]: Reset to factory default settings.

[Contrast]: Adjust the intensity of backlight areas, while the video contents are kept unchanged.

[Brightness]: Adjust the intensity and details of dark areas.

[Colour]: Adjust colour saturation.

[Hue]: Compensate for colour variations.

[Sharpness]: Adjust sharpness in the image.

[Noise reduction]: Filter and reduce noise in an image.

[Tint]: Adjust the colour balance in an image.

[Custom tint]: Customise tint setting. (Only available if [Tint] > [Custom] is selected)

[Digital Crystal Clear]/[Pixel Plus]/[Pixel Plus HD]: Fine-tune each pixel to match surrounding pixels. This setting produces

[HD Natural Motion]: (For Pixel Plus HD) Minimise juddering effects and enhance picture smoothness. [100Hz Clear LCD]: (For Pixel Plus HD) Reduce motion blurring and make picture more clear.

[Advance sharpness]: Enable superior picture sharpness. [Dynamic contrast]: Enhance contrast. [Medium] setting is recommended.

[Dynamic backlight]: Adjust brightness of the TV backlight to match lighting conditions.

[MPEG artifact reduction]: Smooth out transitions on digital pictures. You can switch this feature on or off. [Colour enhancement]: Make colours more vivid and improve the details in bright colours. You can switch this feature on or off. [Gamma]: Adjust the midtone intensity in the picture. Black and white are not affected.

[PC mode]: Adjust the picture when a PC is connected to the TV via HDMI or DVI. [Light sensor]: Adjust settings dynamically based on the current lighting conditions.

[Picture format]: Change the picture format.

[Screen edges]: Adjust the viewing area. (when set to maximum, you may see noise or the rough edge of an image). [Picture shift]: Adjust the picture position for all picture formats except for [Auto zoom] and [Wide screen].

Change picture format

1Press ADJUST.

2Select [Picture format], then press OK.

3Select a picture format, then press OK.

Summary of picture formats

The following picture settings can be

Note

Depending on the format of the picture source, some picture settings are not available.