Lock or unlock one or more channels
1Press > [Setup] > [Channel settings] >
[Child lock] > [Channel lock]. » A list of channels is displayed.
2Select the channel that you want to lock
or unlock, then press OK.
»
channel, you are prompted to enter your PIN code.
3Enter your code and press OK.
»If the channel is locked, a lock icon is displayed.
4Repeat the process to lock or unlock more channels.
5To activate the locks, switch the TV on and off.
»When you switch channels with CH - or CH +, the locked channels are skipped.
»When you access the locked channels from the channel grid, you are prompted to enter your PIN code.
Set parental ratings
Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings lower than your child’s age.
1Press .
2Select [Setup] > [Channel settings] >
[Child lock] > [Parental rating]. » A code setup screen appears.
3Enter your code using Numeric buttons. » The rating menu appears.
4Select an age rating, then press OK.
5 Press to exit.
View Scenea
You can display a default picture as the wallpaper on your TV.You can also load another picture as the wallpaper.
If the sleeptimer is off, the wallpaper is displayed for 240 minutes. Otherwise, it is displayed for the duration of the sleeptimer.
Switch on Scenea
1Press .
2Select [Scenea], then press OK.
»If no picture has been set, the default picture is displayed.
»If a customised Scenea picture is loaded, that picture is displayed (see ‘Customise the Scenea picture’ on page 24).
Customise the Scenea picture
You can load another picture as the wallpaper.
Note
When you load a new Scenea picture, it overrides the current Scenea picture.
To use another picture as the wallpaper, you need a USB storage device that contains a picture that is less than 1 MB in size.
1Load a picture smaller than 1MB in size into a USB storage device.
2Connect the USB storage device to the TV.
3Press .
4Select [Browse USB], then press OK.
5Select a picture, then press
OPTIONS.
6Select [Set as Scenea], then press OK.
»
7Press OK
button to exit Scenea.
24 EN
Downloaded From