Change language
Depending on your broadcaster, you can change the audio language, subtitle language, or both, for a TV channel.
Multiple audio languages, subtitles, or both, are broadcast through teletext or
Change menu language
1Press .
2Select [Setup] > [TV settings] > [Preferences] > [Menu language], then press OK.
3Select a language, then press OK.
Change audio language
You can choose an audio language if it is available from your broadcaster. For digital channels, multiple languages may be available. For analogue channels, two languages may be available.
1While you watch TV, press
OPTIONS.
2For digital channels, select [Audio language], select the language, then press OK.
3For analogue channels, select [Dual
Show or hide subtitles
1While you watch TV, press SUBTITLE.
2Select one of the following, then press OK.
[Subtitles on]: Always display subtitles.
[Subtitles off]: Never display subtitles.
[On during mute]: When audio is muted, display subtitles.
Note
Repeat this procedure to enable subtitles on each analogue channel.
Select [Subtitles] > [Subtitles off] to disable subtitles.
Select a subtitle language in digital channels
Note
When you select a subtitle language in a digital TV channel as described below, the preferred subtitle language set in the installation menu is temporarily overruled.
1While you watch TV, press
OPTIONS.
2Select [Subtitle language], then press OK.
3Select a subtitle language.
4Press OK
English
Downloaded From
EN 25