Retain picture quality
If your TV picture quality is affected by the
1Press .
2Select [Setup] > [TV settings] > [EasyLink] > [Pixel Plus Link] > [On], then press OK.
Hear TV audio through another device
If you connect an EasyLink- compliant device that has speakers, you can get the most out of those speakers if you listen to TV audio through them.
If the connected device is
1Make sure that the
2Press .
3Select [Setup] > [TV settings] > [EasyLink] > [HDMI1 - audio out], then press OK.
4Select one of the following, then press OK.
[On]: Hear the TV audio through the connected EasyLink device. You cannot hear the TV audio through the TV speakers or through devices connected through the digital audio out connector.
[Off]: Hear the TV audio through the TV speakers, or through a device connected through the digital audio out connector.
5Control playback with the TV remote control play buttons.
Switch other devices to standby
If you connect an EasyLink- compliant device that has speakers, you can get the most out of those speakers if you listen to TV audio through them.
If the connected device is
1Press the green button.
2Select [Switch off unused sources], then press OK.
»All connected EasyLink devices are switched to standby.
English
Downloaded From
EN 41