Philips 37PFL4606H, 32PFL4606H Use a Conditional Access Module, Insert and activate a CAM

Use a Conditional Access Module

A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels.

Note

Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module.

Insert and activate a CAM

Caution

Be sure to follow the instructions described below. Wrong insertion of a CAM may damage both the CAM and your TV.

1Switch off the TV and disconnect it from the power outlet.

2Following the directions printed on the CAM, gently insert the CAM into the COMMON INTERFACE at the side of the TV.

Access CAM services

1Insert and activate the CAM (see ‘Insert and activate a CAM’ on page 38).

2Press OPTIONS.

3Select [Common interface].

»Applications provided by the digital TV service operator are displayed.

Note

This menu option is available only if the CAM is inserted and activated correctly.

3

4

5

Push the CAM in as far as it will go.

Reconnect the TV to the power outlet.

Turn on the TV and wait for the CAM to be activated. This may take several minutes. Do not remove the CAM from the slot when in use — this action deactivates digital services.