3.Press the Navigation buttons to set the sleeptimer. The sleeptimer can be set up to
180minutes, in steps of five minutes. The sleeptimer is switched off if it is set to zero minutes.
4.Press OK to activate the sleeptimer. The TV switches to standby after the set period of time.
Child lock
To prevent children from watching TV, you can lock the TV or block age rated programmes.
Set or change the child lock code
1.Press 
.
2.Select [Setup] > [Channel settings] >
[Child lock].
3.Select [Set code] or [Change code].
4.Enter the code with the Numeric buttons.
Tip: If you forget your code, enter „8888‟ to override any existing codes.
NonPublish
Lock or unlock channels
1.In the child lock menu, select [Channel lock].
2.Enter the child lock code with the
Numeric buttons. The [Channel lock] menu appears.
3.Select channels to lock or unlock.
Parental rating
NonPublish
Some digital broadcasters rate their programs according to age. You can set your TV to display only programs with age ratings lower than your child‟s age.
1.Press 
.
2.Select [Setup] > [Channel settings] or
[Satellite settings] > [Child lock] > [Parental rating]. A message appears prompting you to enter the child lock code.
3.Enter the child lock code with the Numeric buttons.
4.Select an age rating, then press OK. All programs beyond the selected age rating are blocked.
For information on child lock codes, see Use |
|
more of your TV > Use timers and locks > | English |
Child lock (Page 29). | |
|
Use subtitles
On analog channels
NonPublish
1. Switch the TV to an analog TV channel.
2. Press 
, then select [Text] and press OK.
3.Enter the three number page number of the subtitles page (usually '888').
4. Press 
to exit teletext. Subtitles display if available.
On digital channels
NonPublish
Not supported on MHEG channels.
1.Press 
.
2.In the menu that appears, select [Off],
[On] or [On during mute], then press OK. Note: With [On during mute], the TV displays subtitles only when the sound is muted with 
.
Subtitle language
NonPublish
This feature is only supported on selected digital channels.
1. While watching TV, press 
.
2.Select [Subtitle language].
3.Select a subtitle language from the list, then press OK.
Note: More information about language settings is available in Setup the TV > Change language settings > Audio, Subtitle, Teletext languages (Page 37).
EN 29