Philips 40PFL76X5H Configure TV speakers, Experience menu, Switch TV audio in experience menu

[Amplifier]: Streams audio through the connected HDMI-CEC device. If system audio mode is not enabled on the

device, audio will continue to stream from TV speakers if [EasyLink] was

selected. If [EasyLink autostart] was enabled, the TV prompts the connected device to switch to system audio mode.

∙ (Previous) / (Next): Searches backwards and forwards on the connected device.

∙Numeric buttons: When EasyLink is enabled, selects a title, chapter or track.

∙ (Options): Displays the menu of the connected device. When is pressed, the TV menu is displayed.

∙ (Standby): Press to enable one-touch standby. This switches the TV and the connected device to standby.

Other EasyLink buttons are available via On- Screen Remote Control (OSRC).

To access the OSRC

1.While watching a connected device, press

.

2.Select [Show remote control], then press OK.

3.Use the Navigation buttons and OK to select and use an on-screen button.

4.Press to exit.

Configure TV speakers

NonPublish

You usually connect the TV to a HDMI-CEC compliant device such as a HTS using both a HDMI cable for video and a digital audio cable for audio. You can output TV audio through the HDMI cable solely, provided

both the TV and device are HDMI ARC compliant (see Connect the TV > Use

Philips EasyLink > Use HDMI ARC (Page 60)).

Configure TV speakers

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [TV speakers].

EN 60

3.Select one of the following options, then press OK:

∙ [Off]: Turn off TV speakers.

∙ [On]: Turn on TV speakers.

∙ [EasyLink]: TV audio continues to be streamed through the TV speakers. Switch the TV audio to the connected HDMI-CEC audio device through the

experience menu.

∙ [EasyLink autostart]: Turn off TV speakers automatically and streams TV audio to the connected HDMI-CEC audio device.

Switch TV audio in experience menu

If [EasyLink] or [EasyLink autostart] are selected, access the experience menu to switch the TV audio.

1.While watching TV, press .

2.Select [Speakers], then press OK.

3.Select one of the following, then press OK:

∙ [TV]: On by default. Streams TV audio through TV speakers until the connected HDMI-CEC audio device switches to system audio control. Thereafter, TV audio is streamed through the connected device.

∙