Philips 46PFL76X5H Update software, TV software, On-screen Help, Software settings Local updates

Page 44

Stand mount or wall mount

Specific TV settings are applied to suit the mounting location of the TV.

1.In the [Preferences] menu, select [TV placement] > [On a TV stand] or [Wall mounted], then press OK.

Update software

TV software

NonPublish

1.Press .

2.Select [Setup] > [Software settings] >

[Current software info], then press OK.

The version of the current software is displayed.

To update the software, use one of these options:

a. update from digital broadcast. b. update with USB.

c. update from the Internet.

For more information, see the following pages.

NonPublish

If available, your TV can receive software updates via digital broadcasts.

If an update is available, a message appears prompting you to update the software. We strongly recommend that you update the software when prompted.

NonPublish

Before performing this procedure be sure to:

Set aside some time to complete the entire update.

Have available a USB flash drive with at least 256MB of storage space.

Have access to a computer with a USB port and internet access.

1.Press .

2.Select [Setup] > [Update software], then

press OK. The update assistant starts. Follow the on-screen instructions to complete the

update.

Note: If you already have the upgrade file

downloaded onto a USB flash drive, connect it to the TV. Then, select [Setup] >

[Software settings] > [Local updates].

If the TV is connected to a router, which is connected to the Internet, you can update the TV software directly from the Internet.

You need a high speed Internet connection.

1.Press > [Setup] > [Update now] and press OK.

2.Select [Internet] and press OK. Follow the instructions on screen.

When the update is done, the TV switches off and back on again automatically. Wait for

the TV to switch back on; do not use the Power switch on the TV.

If the TV is connected to the Internet, the TV displays a message about the availability of new software at start up.

On-screen Help

Before updating the on-screen Help, ensure you have the following:

An empty USB flash drive. The USB flash drive must be FAT or DOS- formatted.

Do not use a USB hard drive.

A PC with Internet access.

An archive utility that supports the ZIP file format (for example, WinZip for Microsoft Windows or Stufflt for Macintosh).

Before updating Help, check the current version installed on your TV. If the version of

Help on your TV is lower than the version available at www.philips.com/support,

download and install the latest Help file.

1.Press .

2.Select [Help], then press OK.

On-screen Help is displayed.

3.Select Technical data > Dimensions. Navigate to the last page of this section, and note the version number.

Note: The version number is a 12 digit number, where the last digit indicates the version of Help installed in your TV. For example, if the version in the TV is '3139

13703583', '3' represents the version of Help currently installed.

EN 43

English

Image 44
Contents Register your product and get support at Contact information Contents TV Tour Remote controlGet started To open or close the Options menu To open or close the Experience menuTV menus Settings Your TV can display HD video content from On the second page of the setup menuConnect devices High Definition TVSafety FAQs that list the HD channels or providers in your countryNetwork and Net TV CongratulationsTouch any part of the TV, power cord ∙ Unplug the TV before cleaningScreen care Risk of overheatingEnvironmental efforts Remote control These energy efficient settings includeEnd of use Wall mount Position the TVUse a Kensington lock Placement Product highlightsFull HD LCD display AmbilightAccess more information Side controls and indicators Remote controlUse your TV OverviewDifferent battery compartments To end For remote control with AAA batteries side by sideBatteries Batteries according to the end of useOn-screen remote control For remote control with coin cell batteriesBasic TV menus HomeSetup ExperienceChannel list Add your devicesSwitch on/off or to standby ∙ Network settings Advanced network settings∙ Software settings Advanced TV update settings Watch TVUse Smart picture settings Switch channelsAdjust volume Use Smart sound settings Watch a connected deviceChange picture format Add new deviceSwitch on Ambilight Setup AmbilightUse Ambilight Set Ambilight responseWhat is Net TV? Enjoy Net TVWhat you need First useBrowse Net TV Unmark favourites ZoomUse the slider bar to set the enlargement MemoryPayment Video storesFormatting an SD card Open Online TV on a channel Use more of your TV Use teletextUse EPG Use timers and locksFavorite channels Use subtitles Access multimedia Browse USBBrowse PC Listen to musicLocks Sleeptimer Use SceneaListen to digital radio Activate SceneaUniversal access Enable universal accessHearing impaired Visually impairedSetup the TV Change picture and sound settingsSettings assistant Smart picture settingsSmart sound settings More sound settingsReset to factory settings Start a TV demoChange channel settings Update channel listReorder channels Rename channelsInstall channels Automatic installInstall analog channels Other optionsChange language settings Install digital channelsFine tune analog channels Audio, subtitle, teletext languagesSetup network Content Net TVMenu language BenefitsProject your PC Introduction Wired installationWi-Fi Ready Network settings PC media server settingsIf no network connection is found, and you An Unknown Device. Select the device and click AllowChange other settings Energy efficient settingsAudio lipsync TV clockUpdate software UpdateSoftware settings Local updates TV softwareReinstall the TV Power Connect the TVFirst connections About cables∙ Do not use an Hdmi cable longer than 5 meters/16.4 feet Pb PrInstructions Bottom TV connectors overviewRear Blu-ray disc player Connect devicesSide DVD player DVD-RecorderPhilips EasyLink Configure TV speakers Home Theatre SystemDig. receiver/satellite Dig. receiver and DVD-RDig. receiver, DVD-R and HTS English Game console Connect more devicesDig. HD receiver Page Dig. camera Dig. camcorder Channel decoder Enable or disable EasyLink EasyLink featuresUse Philips EasyLink Hdmi cable and HDMI-DVI adaptor VGA cableEnable or disable EasyLink Remote Control EasyLink buttonsExperience menu Configure TV speakersSwitch TV audio in experience menu Insert and activate a CAM Use a CAMUse Hdmi ARC Access CAM services Insert SD cardMemory size Insert and formatTroubleshooting General TV issuesTV channel issues Picture issuesSound issues Hdmi connection issuesUSB connection issues Network connection issuesTechnical data Power and receptionDisplay resolutions Display and sound∙ SD card ∙ Common Interface CI ConnectivityRear Dimensions English Index Hearing impairedEnglish Websites
Related manuals
Manual 77 pages 5.15 Kb