Philips 26HW9100D, 30HW9100D Reminderno / YES, Digit Entryno / YES, CH A/V Switchno / YES

L05 User’s Manual 091105.1833

Note 2: Only RF (tuner) channels will be listed in the channel guide. Video inputs (AUX, S-VIDEO, CVI, FRONT A/V) will not appear in the channel guide.

REMINDER(NO / YES)

When REMINDER = YES, the reminder feature provides a constant on-screen indication of the current channel or input, (e.g., TV 2, CVI, etc.), that channel’s or input’s label (if a label has been assigned in CHANNEL INSTALL), and the current MUTE status (i.e., if sound MUTE is active). The REMINDER on-screen indication appears near the top of TV screen viewing area. When REMINDER = NO, the reminder information appears only when the channel or input is changed, then disappears after approximately ten seconds.

3 DIGIT ENTRY(NO / YES)

YES: The TV, upon receiving a remote control digit command, “expects” to receive up to two more successive remote control digit commands (e.g. 123, 012, etc.) before tuning the intended channel. The television will display, in the upper left-hand corner of the screen, each digit as it is received, followed by a hyphen ‘-’, indicating that the TV is “waiting” for the next digit (see Note).

NO: The TV, upon receiving a remote control digit command, “expects” to receive one more successive remote control digit command before tuning the intended channel (see Note).

Note: Successive digit commands must occur within two seconds, or the TV will interpret the previously-received digit(s) as constituting the intended channel and tune accordingly.

A/CH A/V SWITCH(NO / YES)

The A/CH A/V (alternate channel A/V switch) feature provides the choice to use the remote control A/CH command to either switch between the current and previously- tuned channels / inputs, or to step successively through all sources (e.g., ANTENNA (tuner), AUX, S-VIDEO, CVI, FRONT) presently in the channel ring.

YES: Upon receiving an alternate channel (A/CH) command, the TV will tune to the next signal source (e.g., tuner, AUX, S-VIDEO, etc.), if any, in the channel ring.

NO:	Upon receiving an alternate channel (A/CH) command, the TV will switch to the
most recently selected channel / input.
CC	(OFF / CC-1 / CC-2 / CC ON MUTE)

Closed Captioning. Since July 1, 1993, television sets with 13" screens or larger must have built- in caption decoders. Captioning of most broadcast and cablecast programming is mandated under the Telecommunications Act of 1996, except for certain types of programs exempted by the FCC. For additional information, please visit the U.S. FCC web site at (http://ftp.fcc.gov/cgb/consumerfacts/closedcaption.html).

OFF: Regardless of whether there is a closed captioning signal present on the current source, closed captioning will not appear.

CC-1: CC-1-mode closed captioning will be displayed if it is present on the incoming signal.

21