Philips 26HW9100D, 30HW9100D user manual Save Ccno / YES, Source Menu Itemno / YES

Page 22

L05 User’s Manual

091105.1833

CC-2: CC-2-mode closed captioning will be displayed if it is present on the incoming signal.

CC ON MUTE: If the television is in audio mute mode, CC-1-mode closed captioning will be displayed if it is present on the incoming signal.

Note: When the television is powered down and back on again, the closed captioning setting will default to OFF, unless SAVE CC (see SAVE CC) is set to YES.

SAVE CC(NO / YES)

Save closed captioning. This feature enables the CC setting (see CC) to remain in effect after the television is powered down.

NO: When the television is powered down and back on again, the closed captioning setting will default to OFF.

YES: When the television is powered down and back on again, the closed captioning setting last specified in CC (see CC) will remain in effect.

SOURCE MENU ITEM(NO / YES)

This feature provides the option to specify whether the current signal source (e.g., TV 54, AUX, CVI, S-VIDEO, etc.) item is present in the FEATURES MENU that appears when the remote control SLEEP or CC command is issued, or when a guest- mode remote control RECALL command is issued.

Features Menu With SOURCE MENU ITEM = YES

NO: The SOURCE line item is does not appear in the FEATURES MENU.

YES: The SOURCE line item appears in the FEATURES MENU.

Note 1: When the SOURCE item is highlighted, cursor right or left to step through the signal sources (e.g., tuner, AUX, S-VIDEO, etc.) that are in the CHANNEL RING. The SOURCE item in the FEATURES MENU cannot be used to select RF (tuner) channels. Note 2: The SOURCE item can only be used to select signal sources (e.g., tuner, AUX, S-VIDEO, etc.) that are in the CHANNEL RING.

Note 3: If there are no signal sources in the channel ring other than the presently-selected source, the SOURCE item is for indication only, and cannot select any other sources.

HDMI AUDIO SELECTION(HDMI / AV1 / AV2 / AV 3)

This menu item allows the user to associate an audio input to the HDMI input. Devices with an HDMI output usually have digital audio included on the HDMI output; however, outputs such as DVI have no audio included on the connector. For those devices with a

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents 26HW9100D/30HW9100D User’s Manual Safety Information Before Calling Service Symptom Possible Corrective ActionBasic Television Connection Use And Care of Remote Control Rear Jack Panel ConnectionsRemote Controls Guest Remote Control Keys DVD StopConsumer vs. Commercial Mode Accessing TV Setup MenusPage TV Setup Main Menu TV Setup Menu and Sub-Menus ∙ Video Blank Installing AV Inputs∙ Label ∙ Audio Mute∙ Major Channel Factory CH ResetCursor Right will reset the channels programmed in memory ∙ Minor ChannelEnter Digital Menu USE Channel Table NO/YESDigital OSDNO/YES Cursor Right will bring up the Consumer Digital Menu belowColor Default FormatBrightness ContrastUsing the different formats Noise Reductionno / YESAvloff / on Sound Mode Mono / StereoVolume BAR BalancePower Onstandard / Forced /RESTORED MAX VolumeSwitch on Volumestandard / 0 Channel Displaynone / Number / Label / ALLAUDIO/VIDEO OUT Mute ESPAUDIO/VIDEO Muteoff / Black / Blue Monitor OUT Rfno / YES∙ Line 1/LINE Channel Guide No / YES / Power on∙ DISPLAYNO/YES ∙ ClearDigit Entryno / YES CH A/V Switchno / YESReminderno / YES Most recently selected channel / inputSource Menu Itemno / YES Save Ccno / YESHdmi Audio Selectionhdmi / AV1 / AV2 / AV Chip Menu Itemno / YES Chip SetupSleeptimer Save V-CHIPNO / YESSleeptimer Countdown In Progress example Security Standard / High26HW9100D Dimensions 30HW9100D Dimensions
Top Page Image Contents