Connect your computer
AUDIO | VGA |
|
|
|
|
|
L R | EXT 5 | Y | CINEMA LINK EXT 2 |
| ANTENNA | |
| 75 | |||||
IN L | L | Pb | EXT 1 | EXT 3 | MAINS | |
| R | R | Pr |
|
| SERVICE |
2
1
&Connect one end of a VGA cable 1 to the video card of the computer and the other end to the VGA connector at the bottom of the TV.
Fix the connectors firmly with the screws on the plug.
éIn case of a Multimedia computer, connect the audio cable 2 to the audio outputs of your Multimedia computer and to the AUDIO R (right) and L left) inputs of the side panel.
The VGA IN connector allows the following TV and
monitor display modes: |
| |
EDTV | 640/720 x 480p |
|
| 720 x 576p |
|
HDTV | 1920 x1080i |
|
VGA | 640 x 480 | 60 Hz |
SVGA | 800 x 600 | 56 Hz |
XGA | 1024 x 768 | 60 Hz |
Note:
If possible, use the XGA1024x768@60Hz video mode to obtain the best image quality for your LCD monitor.
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can be operated with the remote control via the Recorder or DVD menu on screen.
Recorder
Òp ‡ π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
DVD 
Òp ‡ π † Ï
Prev. Play Stop Play Next Eject
&Press the MENU key on the remote control.
éSelect the Recorder or DVD menu with the cursor up/down.
“Press the cursor left/right, up/down to select one of the recorder or DVD functions.
The key ® for recording can be operated in the TV mode.
If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby.
18