Tips
| Care of the screen |
| Do not touch, push or rub or strike the screen with anything hard as this may | |
|
| |||
|
|
| scratch, mar or damage the screen permanently. And please do not rub with dust | |
|
|
| clothes with chemical treatment. Do not touch the surface with bare hands or | |
|
|
| greasy cloth (some cosmetics are detrimental to the screen). | |
|
|
| Unplug the TV before cleaning the screen. | |
|
|
| When the surface becomes dusty, please wipe gently with absorbent cotton or | |
|
|
| other soft materials like chamois soaks. Do not use acetone, toluene and alcohol | |
|
|
| because they cause chemical damage. Do not use liquid cleaners or aerosol | |
|
|
| cleaners. | |
|
|
| Wipe off saliva or water drops as soon as possible.Their long time contact with | |
|
|
| the screen causes deformations and colour fading. | |
|
|
|
|
|
| Poor Picture |
| • | Have you selected the correct TV system in the manual installation menu? |
|
|
| • | Is your TV or house aerial located too close to loudspeakers, |
|
|
|
| equipment or neon lights, etc.? |
|
|
| • | Mountains or high buildings can cause double pictures or ghost images. |
|
|
|
| Sometimes you can improve the picture quality by changing the direction of the |
|
|
|
| aerial. |
|
|
| • | Is the picture or teletext unrecognisable? Check if you have entered the correct |
|
|
|
| frequency. See Installation, Manual installation, p. 6. |
|
|
| • | Are brightness, sharpness and contrast out of adjustment? Select Factory settings in |
|
|
|
| the Setup, General menu, p. 8. |
|
|
|
|
|
| No Picture |
| • | Are the supplied cables connected properly ? (The aerial cable to the TV, the |
|
|
|
| other aerial to your recorder, the VGA cables to the display, the power cables.) |
|
|
| • | Has the child lock been switched off ? |
|
|
| • | Is your PC switched on ? |
|
|
| • | Do you see a black screen and the indicator in front of the TV lights up green, |
|
|
|
| this means that the display mode is not supported. Switch your |
|
|
|
| correct mode. |
|
|
| • | In case of weak or bad signal, consult your dealer. |
|
|
|
| |
| Digital distortion |
| The low quality of some digital picture material may be the cause of digital image | |
|
|
| distortion. In this case select the Soft setting using the Picture menu, Smart Picture, | |
|
|
| without changing the picture settings manually. | |
|
|
|
|
|
| No sound |
| • | No sound on any channel? Check the volume isn’t at minimum. |
|
|
| • | Is the sound interrupted with the mute key ¬? |
|
|
|
| |
| No solution found |
| Switch your TV off and then on again once. Never attempt to repair a defective | |
| for your picture or |
| TV yourself. Check with your dealer or call a TV technician. | |
| sound problem ? |
|
|
|
|
|
|
| |
| Menu |
| Have you selected the wrong menu? Press the MENU key again to exit from the | |
|
|
| menu. | |
|
|
|
| |
| Remote control |
| • Check if the remote control is in the correct mode. | |
|
|
| • If your TV no longer responds to the remote control, the batteries may be dead. | |
|
|
| • You can still use the MENU/OK key and the | |
|
|
|
| |
| Standby |
| Your TV consumes energy in the standby mode. Energy consumption contributes | |
|
|
| to air and water pollution. Power consumption: 2 W. | |
|
|
|
| |
| No stable or not |
| Check if you have selected the correct VGA mode in your PC. See the separate | |
| synchronised VGA |
| instruction manual with the monitor. | |
| picture |
|
|
|
|
|
|
|
|
| Miscellaneous |
| . | Ambient temperature: + 5~ + 35°C |
|
|
| . | Mains: 50/60 Hz Auto Voltage ranging from 198 V to 264 V |
|
|
| . | Power consumption: around 160 W |
|
|
| . | Standby consumption: 1 W |
|
|
| . | Weight (excl. packaging): 17 kg |
|
|
| . | Dimensions (wxhxd): 891x489x110 |
|
|
|
|
|
|
|
|
|
|
20