Audio- and video equipment keys
B
DVD/R SAT TV VCR AUX
Most of the audio and video equipment from our range of products can be operated with the remote control of your TV.
Normal mode
Press one of the keys after you pressed the SELECT key repeatedly according to the equipment you want to operate with this remote control. See Use of the remote control, p. 4.
v | SELECT | k |
DEMO | T |
|
BROWSE
=b
MOT | OK |
|
MENU |
| b |
+ |
| + |
V | ¬ | P |
- -
_- ABCDEF
1 2 3
Bto switch to standby
ºfor pause,
®for record,
Òfor rewind (VCR, CD); search down (DVD)
‡for stop,
πfor play,
†for fast forward (VCR, CD); search up (DVD)
ito display information
MENU to switch the menu on or off
-P + for chapter, channel, track selection
0 to 9 digit entry,
cursor up/down
to select the next or the previous disc (CD)
cursor left/right
to select the previous or following track (CD)
0to select a DVD title/chapter; index (AUX)
bto select your choice of subtitle language (DVD)
GHIJKLMNO
4 5 6
PQRSTUVWXYZ
7 8 9
| .@ |
|
i | 0 | 0 |
|
|
ON/OFF Ambilight MODE
® Ò ‡ †
- FAVORITES - º
q | VIEW ✓π |
Notes:
-If no action is being undertaken within 60 seconds, the remote control returns to TV mode.
-After an action in the selected system mode, the remote control will remain in this mode for 60 seconds and will then return to TV mode or press the SELECT key to return to TV mode immediately.
Expert mode
When you do not want the remote to go back to TV mode, and to stay in the mode selected, proceed as follows:
&Select TV mode with the SELECT key.
éPress the SELECT key again simultaneously with the OK key for at least 2 seconds.
“Select the desired mode with the SELECT key.
The remote will not go back to TV mode from now on and will remain in the mode selected.To go back to the default setting of the remote (TV mode) repeat what is explained above, selecting the TV mode.
Note: LED behaviour
-If the LED blinks once after pressing the SELECT key simultaneously with the OK key for at least 2 seconds, the remote control is in Expert mode and the remote control remains in the mode selected.
-If the LED blinks 4 times after pressing the SELECT key with the OK key for at least 2 seconds, the remote control is in Normal mode and the remote control returns to TV mode after 60 seconds.
Direct selection of a connected peripheral equipment
When the remote is in TV Expert mode you may directly select a connected equipment in the following way:
Press:
-The v key followed by digit ‘1’ to select the device connected to EXT1.
-The v key followed by digit ‘2’ to select the device connected to EXT2.
-The v key followed by digit ‘3’ to select the device connected to EXT3.
-The v key followed by digit ‘4’ to select the device connected to EXT4.
-The v key followed by digit ‘5’ to select the device connected to DVI.
-The v key followed by digit ‘6’ to select the device connected to HDMI.
-The v key followed by digit ‘0’ to select the device connected to the side.
Note: Make sure your equipment is switched on.
31