Philips FW-C380 Demonstration mode, Switching the system on, Switching the system to standby mode

Page 13

Operating the System

Notes:

–PLUG and PLAY will be reinitiated again during the next power up if :

i)PLUG and PLAY installation was not completed.

ii)No stereo frequency being detected during PLUG and PLAY, "CHECK ANTENNA" will be displayed.

–You can store any radio stations manually or automatically after PLUG and PLAY.

–When PLUG and PLAY is used, all previously stored radio stations will be replaced.

–During PLUG and PLAY, if no button is pressed within 15 seconds, the system will go to demonstration mode (if demonstration mode is enable)

Demonstration mode

The system has a demonstration mode that shows the various features offered by the system.

To disable the demonstration mode

●Press and hold Ç (on the system only) for 5 seconds when the system is in demonstration mode.

➜"DEMO OFF" is displayed.

➜The system will switch to standby mode.

To enable the demonstration mode

●Press and hold Ç (on the system only) for 5 seconds when the system is in standby mode. ➜ The demonstration will begin.

Notes:

–If the demonstration mode has not been disabled, it will resume 5 seconds later after the system switches to standby mode.

–When the system is switched on from the main power outlet, the CD changer tray may open and close again to initialize the set.

–Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again.

Switching the system ON

Press CD, TUNER, TAPE or AUX.

You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.

Switching the system to standby mode

Press STANDBY-ONor B on the remote control.

➜ The system will switch to standby mode.

Switching the system to ECO POWER standby mode (when Demonstration mode is stopped)

Press ECO POWER or press and hold B on the remote control for more than 2 seconds to switch to eco power standby mode (< 2 watts).

➜"ECO PWR" will be displayed, after which the display screen goes blank.

➜The ECO POWER LED will be lit.

To switch on the system from ECO POWER mode

Press ECO POWER.

➜The system will switch to last selected source.

Press CD, TUNER, TAPE or AUX on the remote control

➜The system will switch to the selected source.

Note:

–If the demonstration mode has not been disabled, it will resume 5 seconds later.

English

 

 

13

pg 01-30/C380/22-Eng

13

12/7/00, 3:42 PM 3139 115 20641

Page 12 Page 14
Image 13
Page 12 Page 14
Contents FW-C380 Important notes for users in the U.K How to connect a plugMains plug Copyright in the U.KTape 3139 115 131 107155 179Contents Safety Information Supplied AccessoriesGeneral Information Environmental InformationRear Connections PreparationsPreparation Inserting batteries into the Remote ControlThey should be disposed off properly STANDBY-ON y Controls on the player and remote controlCD / CD Tape / Tape 1Prev í / Next ëPRESET 4 Search à á Tuning à áControls Then select the desired function É, í, ë, etcOperating the System Preparation proceduresPlug and Play Switching the system on Demonstration modeSwitching the system to standby mode Volume Control DIM modeSelecting the Source Sound Control¶ Press Incredible Surround to switch on Press to select the VEC feature VEC led lights upTo switch on Optimal Sound Mix ¶ Press Optimal Sound MIX Discs for playback Compact DiscDisc Direct Play Disc Change Playing a DiscSelecting a desired track Searching for a particular passage during playbackShuffle only on remote control Erasing the programme when playback is stoppedReviewing the programme Playing the programmeStoring Preset Stations Tuning to radio stationsSelect preset 10 before starting automatic TunerReceiving RDS Radio Station Ç Tuning to Preset Radio StationsManual programming To cancel News function Setting the time with RDS clock Press ClocktimerRDS Clock To start News functionTape This feature is available during tape playback onlyLoading a tape Auto ReplayAux When playback is stoppedDuring playback For recording, use only tape of IEC type I normal tape One Touch RecordingLoad a blank tape in tape deck Press Ç to stop recordingCD Synchro Start Recording RecordingRecording from other sources Digital Recording via Digital Out¶ The volume of the timer will increase Clock/TimerRecently selected volume level From the minimum level to the mostPress and hold Clocktimer for more than 2 seconds To switch off the TimerTo start the Timer again for the same While Sleep mode is activatedSubject to modification SpecificationsTroubleshooting MaintenanceSymptom Remedy Recording or playback cannot be System does not react when anyLevel Tape deck door cannot open

FW-C380 specifications

The Philips FW-C380 is a compact yet powerful home audio system designed to deliver high-quality sound and an entertaining multimedia experience. With its sleek and modern design, this system is perfect for those who appreciate both aesthetics and functionality in their audio devices.

One of the standout features of the Philips FW-C380 is its robust sound output, which is achieved through a combination of advanced audio technologies and thoughtfully designed components. The system boasts a total power output of 300 watts, providing deep bass and crystal-clear highs that can fill any room. The inclusion of a subwoofer enhances the audio experience, allowing users to enjoy music, movies, and games with immersive sound quality.

The FW-C380 is equipped with a CD player that supports CD, CD-R, and CD-RW formats, catering to a variety of disc-based media. This versatility allows users to enjoy their favorite albums without restriction. Furthermore, it features a USB port that enables easy playback of music files from USB flash drives, making it convenient for users who prefer digital collections.

Connectivity is another key feature of the Philips FW-C380. The system supports various audio input options, including an AUX input, allowing users to connect external devices such as smartphones, tablets, or laptops easily. Additionally, the system comes with a built-in FM radio tuner, giving users access to a wide range of radio stations.

The user-friendly interface and remote control make navigating through the FW-C380’s features straightforward. Users can effortlessly switch between modes, adjust volume levels, and select tracks from the comfort of their couch or chair.

In terms of design, the unit is compact and space-efficient, making it suitable for small living spaces or bedrooms. Its modern finish complements a variety of home decor styles, ensuring it fits seamlessly into any environment.

Overall, the Philips FW-C380 stands out as a versatile and powerful audio system, perfect for music enthusiasts who seek quality sound, modern features, and a user-friendly design. With its impressive audio performance, flexible connectivity options, and sleek aesthetics, the FW-C380 is an excellent choice for anyone looking to enhance their home audio experience. Whether for casual listening or full-fledged parties, this audio system ensures a delightful sound experience.
Top Page Image Contents