Philips FW-C380 manual To switch off the Timer, Press and hold Clocktimer for more than 2 seconds

Page 27

Clock/Timer

3Press à or á on the system to set the hour for the timer to start.

4Press í or ë on the system to set the minute for the timer to start.

5Press CLOCK•TIMER to store the start time.

➜The timer is now set.

➜The TIMER remains on the display.

At the preset time, the timer will be activated. ➜ The selected source will be played.

Notes:

–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.

–If the source selected is TUNER, the last tuned frequency will be switched on.

–If the source selected is CD, playback will begin with the first track of the selected disc or programme. If the disc trays are empty, the TUNER will be selected instead.

–The timer will not activate if a recording is in progress.

To switch off the TIMER

1Press and hold CLOCK•TIMER for more than 2 seconds.

2Press Ç on the system to cancel the timer.

➜The timer is now switched off.

➜The display will show "OFF" and the TIMER disappears.

To start the TIMER again (for the same

preset time and source)

1Press and hold CLOCK•TIMER for more than 2 seconds.

2Press CLOCK•TIMER again to store the start time.

➜The timer is now on.

➜The TIMER appears on the display.

Sleep Timer (only on remote control)

This feature allows you to select a length of time after which the system will switch to the standby mode automatically.

1Press SLEEP on the remote control repeatedly to select a period of time.

➜The selections are as follows (time in minutes): 15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 …

➜"SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes.

2When you reach the desired length of time, stop pressing the SLEEP button.

➜The SLEEP display lights up.

➜The Sleep Timer is now set. Before the system switches to standby mode, a countdown of 10 seconds will be displayed.

"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1" ™ "SLEEP"

While SLEEP mode is activated

Press SLEEP once to view the remaining length of time.

Press SLEEP twice to change the pre-selected period of time.

➜ The display will show the remaining time followed by the sequence of sleep timer options.

To switch off the Sleep Timer

Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY-ONbutton.

English

 

 

27

pg 01-30/C380/22-Eng

27

12/7/00, 3:43 PM 3139 115 20641

Page 26 Page 28
Image 27
Page 26 Page 28
Contents FW-C380 Copyright in the U.K How to connect a plugImportant notes for users in the U.K Mains plugTape 3139 115 179 107131 155Contents Environmental Information Supplied AccessoriesSafety Information General InformationRear Connections PreparationsInserting batteries into the Remote Control PreparationThey should be disposed off properly Tape / Tape 1 Controls on the player and remote controlSTANDBY-ON y CD / CDThen select the desired function É, í, ë, etc Search à á Tuning à áPrev í / Next ëPRESET 4 ControlsPreparation procedures Operating the SystemPlug and Play Demonstration mode Switching the system onSwitching the system to standby mode Sound Control DIM modeVolume Control Selecting the SourcePress to select the VEC feature VEC led lights up ¶ Press Incredible Surround to switch onTo switch on Optimal Sound Mix ¶ Press Optimal Sound MIX Compact Disc Discs for playbackDisc Direct Play Searching for a particular passage during playback Playing a DiscDisc Change Selecting a desired trackPlaying the programme Erasing the programme when playback is stoppedShuffle only on remote control Reviewing the programmeTuner Tuning to radio stationsStoring Preset Stations Select preset 10 before starting automaticTuning to Preset Radio Stations Receiving RDS Radio Station ÇManual programming To start News function Setting the time with RDS clock Press ClocktimerTo cancel News function RDS ClockAuto Replay This feature is available during tape playback onlyTape Loading a tapeWhen playback is stopped AuxDuring playback Press Ç to stop recording One Touch Recording For recording, use only tape of IEC type I normal tape Load a blank tape in tape deckDigital Recording via Digital Out RecordingCD Synchro Start Recording Recording from other sourcesFrom the minimum level to the most Clock/Timer¶ The volume of the timer will increase Recently selected volume levelWhile Sleep mode is activated To switch off the TimerPress and hold Clocktimer for more than 2 seconds To start the Timer again for the sameSubject to modification SpecificationsMaintenance TroubleshootingSymptom Remedy Tape deck door cannot open System does not react when anyRecording or playback cannot be Level
Top Page Image Contents