Philips DVD740VR/001 manual Showview Guide Channel Set, First, fill in the boxes below

VCR Operation

English

SHOWVIEW® Guide Channel Set

First, fill in the boxes below:

Write your local channel numbers in "VCR Channel" column, corresponding "TV-Station" and "GUIDE Channel" columns, using see your TV guide magazine or the TV listings of your local newspaper.

Guide	TV-Station	VCR
Channel		Channel

Now, compare the channel numbers you have written in the GUIDE Channel and VCR Channel columns.You must set all of these channel numbers that don't match using the following procedure before you programme the automatic timer recording using the SHOWVIEW system.

●This setting only needs to be set once, but must be done again if you use this DVD/VCR in another area by moving it.

1Press the VCR button, then the MENU but- ton.

2Press the PLAY B or STOP C button to select INITIAL, then press the FF g button.

3Press the PLAY B or STOP C button to select GUIDE CHANNEL, then press the FF g button.

4Press the PLAY B or STOP C button to select the relevant mode.Then, press the FF g button.

●To set the guide channel individually, select MANUAL.Then, press the FF g button and continue with step [5].

●To set all of the guide channels to AV1, AV2, or AV3 select “AV1”, “AV2”, or “AV3”.Then, press the MENU button to exit.

5Press the PLAY B or STOP C button to select the position number, then press the FF g button.

6Press NUMBER, the PLAY B or STOP C but- ton to enter guide channel number, then press the FF g button.

●Press the REW h button to cancel the number.

●You can select guide channels 1-255.

●To select channels from 1 to 9, first press “0” twice then 1 to 9.

●To select channels from 10 to 99, first press “0” once then press the last two digits. (To select channel 80, first press “0” then press “8” and “0”).

To set another, repeat steps [5] to [6].

7Press the MENU button to exit.

GUIDE CHANNEL

P96	:	99
P97	:	---
P98	:	80
P99	:	---
AV1	:	---
AV2	:	---

Position Number

Gudie Channel Number

20