If your Television has A/V Connectors...
Refer to the illustration below:
1.Connect the satellite receiver A/V jacks to the TV’s A/V IN jacks. Alternately, you can also connect the satellite receiver’s AUDIO jacks to your audio receiver’s AUDIO IN jacks using audio cables.
2.Connect one end of the AC power cord to the satellite receiver’s AC IN jack. Connect the plug end to an AC outlet.
3.Connect other equipment to an AC outlet.
4. Switch on your TV first and select the appropriate A/V mode depending on the connection chosen in step 2. Refer to the user manual of your TV set to select the proper A/V mode
(AUX/VCR,
5. Your satellite receiver is now ready for installation.To continue, refer to the installation section on page 17.
Digital Satellite Receiver (DSR)
A/V Cable
TV
TV
10