Philips VR140/07 operating instructions Important notes regarding operation, Interference

VR140/07

Thank you for buying a Philips video recorder. This video recorder is one of the most sophisticated and easy-to-use video recorders (VCR) on the market. Please take the time to read this operating manual before using your video recorder. It contains important information and notes regarding opera- tion. The video recorder should not be turned on immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transport- ing the device. The video recorder needs this time in order to become acclimatised to its new environ- ment (temperature, air humidity, etc.).

This video recorder is used for the recording and playback of VHS videocassettes. Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used with a suitable adapter.

We hope you enjoy your new video recorder.

PAL

Important notes regarding operation

"Danger: High voltage!

Do not remove the top cover as there is a risk of an electrical shock!

"The video recorder does not contain any com- ponents that can be repaired by the customer. Please leave all maintenance work for qualified personnel.

"As soon as the video recorder is connected to the power supply, there are some components that are in constant operation. To switch off the video recorder completely you must disconnect it from the power supply.

!Make sure that air can circulate freely through the ventilation slots on the video recorder. Do not place the device on an unsteady base.

!Make sure that no objects or liquids enter the video recorder. Do not place vases or the like on the video recorder. If liquid is spilt into it, immediately disconnect the video recorder from the power supply and call After-sales Service for advice.

!Do not place any combustible objects on the device (candles, etc.).

!Make sure that children do not place any for- eign objects within the openings or ventilation slots.

These operating instructions have been printed

on non-polluting paper.

Deposit old batteries at the appropriate collec- tion points.

Please make use of the facilities available in your country for disposing of the packaging of the video recorder in a way that helps to pro- tect the environment.

This electronic device contains many materials that can be recycled. Please enquire about the possibilities for recycling your old device.

So that you can identify your machine for service questions or in the event of theft, enter the serial number here. The serial number (PROD.NO.) is printed on the type plate fixed at the back of the device.

MODEL NO.	VR140/07
PROD. NO.	...........................

This product complies with the requirements of Directive 73/23/EEC +89/336/EEC +93/68 EEC.

Interference

The Department of Trade and industry operates a radio Investigation Service to help TV licence hold- ers improve reception of BBC and ITC programmers where these are being spoilt by interference.

If your dealer cannot help, ask at a Main Post Office for the booklet ‘How to improve television and Radio Reception’.

Specifications

Voltage: 220-240V/50Hz

Power consumption : 14W

Power consumption (Standby): less than 3W (PWR. in the display switched off)

Rewind time: approx. 260 seconds (cassette E- 180)

Dimensions in cm (WxDxH): 36.0x22.6x9.2

Number of video heads:2

Recording/playback time:

3 hours (SP) (cassette E-180)

6 hours (LP) (cassette E-180)

Supplied accessories

•Operating instructions

•Remote control and batteries

•Aerial Cable

3103 166 33531	1	EN
0VMN03618/HE271BD