
7. Programming a recording (TIMER)
General information
Use a TIMER programming to automatically start and stop a recording at a later time or date. The video recorder will switch to the right programme number and begin recording at the correct time. With this video recorder, you can
*the date you want to make the recording
*the programme number of the TV channel
*the start and stop time of the recording
This information is saved in a 'TIMER' block.
Programming a recording
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TIMER' with PLAY
Then press FWD 1- B .
4.Select ONCE, DAILY, or WEEKLY recording with PLAY
FWD 1- B .
SELECT K L CHOOSE B
→ONCE
DAILY WEEKLY TIMER LIST
END=EXIT
Selecting once/daily/weekly recordings Use PLAY
'ONCE': Recording once
'DAILY': Repeated daily recordings from Monday to Friday
'WEEKLY.': Repeated weekly recordings (every
week on the same day)
If any of the TIMER blocks are in use, 'FULL' will appear on the TV screen.
5.Select TIMER block with 0..9 .
6.With 0..9 buttons you can enter 'START' (start time) , 'STOP' (end time) , 'PROG.' (programme number) and 'DATE'.
7.When all inputs are correct, press STATUS/EXIT . The programming information
is stored in a TIMER block.
8.Insert a cassette with an intact security tab (unprotected).
9.Switch off with .
The programmed recording will only function when the video recorder is switched off with
STANDBY/ON y .
How to check, or delete a pro- grammed recording (TIMER)
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'TIMER' with PLAY
Then press FWD 1- B .
4.Select 'TIMER LIST' with PLAY
, and confirm with FWD 1- B .
SELECT K L CHOOSE B
ONCE
DAILY WEEKLY
→TIMER LIST
END=EXIT
5.Select timer block with FWD 1- B .
6.To cancel the recording, press CLEAR .
7.To end, press | STATUS/EXIT . |
8.Switch off with | STANDBY/ON y . |
12 | EN |
|