Connecting without a scart cable

6.If the connection was properly made and your TV was automatically switched to the programme number for the scart socket, you will see the fol- lowing picture:

PLEASE CONNECT AERIAL OR

CABLE TO THE VCR

THEN...

PUSH P+ KEY

FOR PLAY ONLY-PUSH PLAY

Then, read the paragraph 'Preparation for use' in the chapter 'Installing your video recorder'.

My screen is empty

Many TVs are switched to the programme number for the scart socket by way of a control signal sent through the scart cable.

If the TV does not automatically switch to the scart socket programme number, manually change to the corresponding programme number on your TV (see your TV's operating instructions).

Have the following cables ready: an aerial cable.

1.Switch off your TV.
2.Remove the aerial	TV	AERIAL
cable plug from the
aerial input socket of
the TV. Insert it into
the AERIAL at the
back of the video	TV
recorder.		RF OUT

3.Insert one end of the supplied aerial cable into the RF OUT at

the back of the video recorder and the other end into the aerial input socket at the back of the TV.

4.Insert AC cable into the wall socket.

5.Switch on your TV and select the programme number used for video playback on your TV set (see your TV's operating instructions).

6.Select this programme number and manually start the TV's channel search as if you want- ed to save a new TV channel until the next screen appears.

PLEASE CONNECT AERIAL OR

CABLE TO THE VCR

THEN...

PUSH P+ KEY

FOR PLAY ONLY-PUSH PLAY

7.Save this programme number setting on your TV for video recorder operation.

You can find more details in chapter 'Preparation for use'.

Programme number for video recorder opera- tion

You have now saved a programme number for use by your video recorder as you would a regular TV channel. This programme number must now be used in future for video recorder playback ('video recorder' TV channel).

5	EN