Philips VR140/07 To enter or change your selection with, Switching on, Automatic switch-off

Page 3
AERIAL
RF OUT

Front of the device

STANDBY/ONy To switch off or on, interrupt a function.

PROGRAMME+ PROGRAMME-

To select the programme number. During normal playback, press to adjust the tracking.

RECORD

To record the TV channel selected at this moments.

FWD

When tape playback is stopped, press to fast forward the tape at high speed. During playback, press to fast forward the tape while the picture stay on the screen.

REW

When tape playback is stopped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stay on the screen.

PLAY To play a tape.

STOP/EJECT To stop the tape and eject the cassette.

Back of the set

TV To connect the TV set(programme number).

To connect the aerial cable.

To connect the TV set.

2. Important notes for operation

Navigation in the screen menu

You can check/change many functions and set- tings of your video recorder via the on-screen menu. The individual functions are selected, via the remote control as follows:

Call up the menu: with MENU .

To select: with PLAY B-K STOP C-L .

To enter or change your selection: with the

number buttons 0..9 or with PLAY B-K STOP C-L .

The symbols on your video recorder display

These symbols can light up on your video recorder display:

PWR. REC

When you keep your video recorder on.

When you have put a cassette in the video recorder.

To save or confirm: with FWD 1- B .

To cancel: with CLEAR .

To end: with STATUS/EXIT .

SELECT K L CHOOSE B

TIMER RECORD SET UP VCR SET UP TUNER SET UP INITIAL SET UP

END=EXIT

Display of programme number of the TV channel / time / RF channel.

When you record.

When you have programmed a recording.

Switching on

You can switch on the video recorder with the

STANDBY/ON y

button.

Automatic switch-off

If the video recorder is not used for several minutes, it switches itself off automatically. This function can be deactivated (e.g. if you want to use the video recorder as a TV receiver). For more information, please read the section 'Automatic switch-off' in chapter 'Other functions'.

Time in the display

If you have switched the video recorder off with '18:00'.

If the clock has not been set, ' --:-- ' will appear.

STANDBY/ON y

, the time will show in the display, e.g.

Power consumption

The video recorder should always be connected to the mains so as not to affect the use of the TV or programmed recordings.

If the display has been switched off, your video recorder consumes less than 3W in stand-by.

Power outage/no power

Channel information remains saved for up to 10 year, the time and timer information is saved for up to 1 minute.

3

EN

 

Image 3
Contents VR140/07 SpecificationsSupplied accessories Important notes regarding operationButtons for VCR feature only Buttons with TV featureDescription of controls Power consumption To save or confirm with FWD 1- B To cancel with ClearSwitching on Automatic switch-offConnecting with a scart cable Connecting the video recorderPreparing the remote control for operation Connecting your video recorder to the TV setMy screen is empty Connecting without a scart cableInstalling your video recorder Preparation for useManual TV channel search Automatic Tuning Select Auto Tuning withSorting and clearing TV channels manually Setting the RF out channel Setting the clockPlayback Manual recording SP/LP Selecting the recording speed SP or LPProgramming a recording Programming a recording TimerHow to check, or delete a pro- grammed recording Timer Switch off withHelpful Hints How to change a programmed recording TimerSwitching the status display off or on Other FunctionsClock Display Automatic switch-offSelect VCR SET UP using Blue Background on or offBefore you call an engineer Austria