Record to Hard Disk
IMPORTANT!
Unrecordable pictures
Pictures with copy protection cannot be recorded on this recorder. When the recorder receives a copy guard signal, the recorder continues to record but only a blank or grey picture will be recorded.
Recording TV programmes
Follow the instructions below to record the TV programmes onto the HDD, where you can store for future viewing and copy to a recordable DVD disc if required.
Record the current TV programme
A Press INFO m on the remote control to display the Time Shift video bar.
B Press (RECORD) on the remote control.
The current TV channel will be recorded, up to maximum of 6 (six) hours.
21:00 |
|
|
| 23:13 |
|
|
|
|
|
|
|
|
|
|
[Start Rec] "Record from here" [Record] "Record Program"
Cancel rec. | BACK | MORE INFO |
If the TV programme data is available in the GUIDE Plus+ system
“Record 1 Program” will appear at the right end of the video bar. The recording will stop automatically at the end of the TV programme.
If you want to record the following TV programme, press (RECORD) again.
If the TV programme data is not available in the GUIDE Plus+ system, pressing (RECORD) again will set the recording time in
C To stop the recording before the scheduled ending, press (STOP).
Record a specific section of TV programmes
A Press INFO m on the remote control to display the Time Shift video bar.
B Use | keys to select a TV programme |
that can be found in the temporary HDD | |
storage. |
|
C Use | keys to search for the beginning |
of the scene where you want to start recording, then press Å(PAUSE).
D Press the Red button on the remote control to start recording from here.
E Press
F Press NEXTÉ to search for the point where you want to end the recording and press (STOP) on the remote control.
A red marking will be visible on the video bar to indicate the marked recording.
English
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a recordable DVD, see page 38.
39
dvdr9000h_eu_eng2.indd 39