Philips DVDR9000H user manual Analogue Channel settings manual search

English

System Menu Options (continued)

Analogue Channel settings - manual search

	Analogue Ch.
Setup
Entry mode	MHz
Entry	167.5 MHz
Preset	P 04
Preset name	RTL4

Decoder	Off	On
TV system	PAL-BG
Nicam	Off	On
Fine t une

In some cases, not all of the available TV channels may have been found and stored during basic installation. In this case, you will need to search for and store the missing or coded TV channels manually.

APress SYSTEM on the remote control. Select { Setup } in the menu and press NEXTÉ repeatedly to select { Analogue Ch. }.

B Press repeatedly to select the following settings in the menu and press NEXTÉ to enter its options.

STORE	SEARCH
		Select manual search based on channel allocation or frequency entry
Entry Mode
		{ Channel, S. Channel (Special channel), MHz (frequency) }.
		Note: S. Channel refers to specified hyperband channels.
		– Use the alphanumeric keypad 0-9to enter the frequency/channel
Entry
		number, press OK and the Green button for { STORE }.
		OR
		– Press the Blue button on the remote control for { SEARCH }, once
		you have found the correct frequency/channel, press the Green
		button for { STORE }.
Preset		Use the alphanumeric keypad 0-9to enter the preset channel number
		for the channel to store (e.g.,‘01’), press OK and the Green button for
		{ STORE }.
Preset name		Use the alphanumeric keypad 0-9to enter the preset channel name,
		press OK and the Green button for { STORE }.
		Maximum four characters for preset channel name.
		If the current TV channel is transmitted by coded TV signals that can only
Decorder
		be viewed properly with a decoder which is connected to the
		EXT2 AUX-I/O socket, you need to activate the connected decoder.
		{ On }	– Select this to allocate the connected decoder to this
			TV channel.
		{ Off }	– Turns off the decoder feature.
		Set the TV system that produces the least distortion of picture and sound.
TV system
		See last page “TV System Guide” for more information.
		NICAM is a digital sound transmission system. It can transmit either one
NICAM
		stereo channel or two separate mono channels.
		{ On }	– Improves the sound transmission of the TV channel.
		{ Off }	– Select this if the reception is poor and the sound is
			distorted.
		Select this to fine-tune the TV channel manually if the reception is poor.
Finetune
		Use	keys to adjust the frequency and press OK to confirm.

82

dvdr9000h_eu_eng2.indd 82

2005-10-13 9:18:22 AM