| Troubleshooting (continued) |
|
|
Problem (Playback) | Solution |
Disc will not play. | – Insert the disc with the label facing up. |
| – The child lock is on. Read chapter “System Menu Options - |
| Access settings - Child lock” for details. |
| – Wrong region code. The DVD must be coded for ALL regions |
| or Region 2 in order to play on this recorder. |
| – There is no recording on the disc or wrong disc type. Read |
| chapter “Playback from Disc - Playable discs” for details. |
| – Make sure the disc is not scratched or warped. Clean the disc |
| or use a new one. |
| – Check if the disc is defective by trying another disc. |
English
The picture is distorted or black and white during playback.
There is picture or sound interference with the TV reception.
Distorted sound coming from a connected
The recorded DVD cannot be played back on another DVD player.
–The disc does not match with the TV colour system standard (PAL/NTSC).
–The disc is dirty. Clean the disc.
–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
–Have your aerial or cable TV signal checked.
–
-Analogue Channel settings - Fine Tuning” for details.
–Do not connect any cables from this recorder to the ‘Phono’ input of your amplifier.
–If you are playing a DTS CD, you must use the COAXIAL or
–If a recording is too short, it is possible that a DVD player cannot detect it. Observe the following ‘minimum recording times’. Recording mode : {HQ} – 5 minutes, {SP}– 10 minutes, {SPP} – 13 minutes, {LP} – 15 minutes, {EP} – 20 minutes, {SLP}
– 30 minutes, {SEP} - 30 minutes.
–Some DVD players cannot play back DVD±RW recordings. You can solve this problem by using a special function :
1)Press OPEN/CLOSE on this recorder to open the disc tray.
2)Insert the disc but do not close the tray.
3)Hold down the number button {2} on the remote control until the tray closes. The disc is modified.
4)If this fails to produce the desired result, repeat the procedure using the number button {3} on the remote control.
5)You can restore the disc to its original condition by pressing and holding number button {1}.
Warning! There is a risk that you can no longer play the disc on other DVD players after the following procedure. Therefore, apply this function with particular care.
93 | 93 |
dvdr9000h_eu_eng2.indd 93