Philips DVDR9000H user manual Childlock Change pin, Auto resume

System Menu Options (continued)

Access settings (underlined options are the factory default settings)

English

Childlock

Change pin

Enter PIN of your choice

This will be used to access locked features. Pin Code ####

Cancel

You will be prompted to enter the four-digit pin code.

–When doing this for the first time, use the alphanumeric keypad 0-9 on the remote control to enter any four-digit pin code you prefer.

–If you forget your four-digit pin code, key in ‘1504’.Then enter any four-digit you prefer and enter the same pin code again to confirm it.

With this feature, you can prevent children from viewing certain discs or the recorded titles in the HDD. When this feature is enabled, it will appear as { CHILDLOCK } at the bottom of the coloured options screen whenever you select a title in the content menu. You can press the Yellow button on the remote control to set the childlock on or off. Note: This recorder can memorise settings for 50 discs.

{ On }	–	Turns on child lock function.
		A four-digit pin code must be entered in order to play
		the locked disc or title in the HDD.
{ Off }	–	All discs can be played.

Use the alphanumeric keypad 0-9to enter your new four-digit pin code. You must enter the same pin code again to confirm it.

To cancel your change, press to select { Cancel } in the menu and press OK on the remote control.

Features settings (underlined options are the factory default settings)

Auto resume	With this feature, you can resume playback of the disc from where it last
	stopped point. This applies to the last 20 DVDs and Video CDs you
	played.
	{ On }	– Turns on auto resume mode.
	{ Off }	– The disc will always start from the beginning when you
		load a disc or start playback.

77

dvdr9000h_eu_eng2.indd 77

2005-10-13 9:18:21 AM