Philips 21PV708-715-908/39 manual Manual Recording, Protecting your recordings, Auto-assembling

Page 18
AUDIO L/R

6.MANUAL RECORDING

Use ’Manual Recording’ to make a spontaneous recording (for example, a programme currently being shown).

If you want to start and stop a recording manually, read the section: ’Recording without automatic switch-off’.

If you want to start a recording manually but have it stopped automatically, read the section: ’Recording with automatic switch-off’.

Protecting your recordings

So that you don’t accidentally delete an important recording, remove the special tab on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want to protect your recording, you can seal the gap again with sticky tape or slide the special tab to the right.

Recording without automatic switch-off

aInsert a cassette.

b Use the

P

button to select the programme number

you want to record, for example, ’P01’.

Programme number ’E1’ is provided for recording from external sources (via the EXT. 1 scart socket).

Programme number ’AV’ is provided for recording from external sources (via the Audio/Video socket at the front of the TV-VIDEO Combi).

c To start recording, press the RECORD/OTR button on the remote control or e on the TV-VIDEO Combi.

When you are recording, the red recording light at the front panel of the TV-VIDEO Combi will be lit.

d Stop recording with the

STOP

button.

If you want to switch off the screen while recording,

press the

 

 

button once .

STANDBY

 

To switch the screen back on again, press the

Pbutton.

During a recording you can watch other TV channels.

Recording with automatic switch-off (OTR one-touch-recording)

aPut a cassette in the machine.

b Use the

 

P

button to select the programme number

you want to record.

c Press the

 

button on the remote control.

RECORD/OTR

When you are recording, the red recording light at the front panel of the TV-VIDEO Combi will be lit.

d Press the RECORD/OTR button again and again until the display on the TV-VIDEO Combi shows the desired end time or length of the recording.

To cancel this information, press the CLEAR button.

eConfirm with the OK button.

f To end, press the MENU button.

Auto-assembling

You can use the auto-assembling function to join individual recordings without any major picture disturbance between them.

aWhile the cassette is playing, search for the correct position on the tape.

b Stop the cassette by pressing the STOP button. ’Pause’ will appear on the TV screen.

cNow start recording as usual by pressing the RECORD/OTR button on the remote control.

Selecting the recording speed (SP or LP)

You can reduce the recording speed by half. This makes it possible to record, for example, eight-hours instead of four-hours on an ’E240’ (four-hour) cassette.

aPress the MENU button. The main menu appears.

b Select the line ’Tape’ with the } or z button, and

confirm with the

 

button.

cSelect the line ’Tape speed’ with the } or z button.

d Select the required recording speed with the

 

or

 

 

button.

 

 

 

 

 

 

’LP’: Long Play = half recording speed (double recording time).

’SP’: Standard Play = normal recording speed.

The picture quality will be adversely affected when recording at half recording speed (’LP’).

For playback, the correct recording speed will automatically be selected.

eConfirm with the OK button.

f To end, press the MENU button.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Contents Remote control Operating Instructions in BriefFront of the set Back of the setTechnical information Safety instructions and other notesOperating Instructions Philips 21PV708-715-908/39 Emergency interruptSpecial functions on your TV-VIDEO Combi Connecting Your TV-VIDEO Combi Connecting the cablesConnecting a decoder or other equipment Installing Your TV-VIDEO Combi Initial installationAllocating a decoder Satellite receiver Channel setting. Important This re-tuning is onlyManual TV channel search Select function ’ON’ withSpecial installation functions Automatic TV channel searchSearching for new TV channels Allocating a channel numberDelete a TV Channel Setting the language Setting the time and dateAutomatic time and date setting Important Notes for Operation User guide OSDMenu button Important notes for operation 9buttons or by inserting a cassette Button,TV SET Functions How to read Teletext Selecting a preset sound setting Smart Sound Automatic volume control AVL Sound track selectionPlayback Functions Tracking during playback Cleaning the video headsPicture interference Tracking during still pictureProtecting your recordings Recording with automatic switch-off OTR one-touch-recordingManual Recording Auto-assemblingProgrammed Recording Timer ’PDC’ Programme Delivery ControlProgramming a recording with ’SHOWVIEW’ To end, press the Timer button Programming a recording without ’SHOWVIEW’Automatic recording from a satellite receiver SAT Recording Select the TV channel you want to record from PressHow to check or change a Timer How to clear a TimerAdditional Functions Changing the TV system Parental controlLine ’Video system’ select the required TV Switching the On-screen display OSD on or off Switching to 169 wide screen pictureSelect the line ’Display’ with the menu buttons or z Digit button 2 at the same time to switch the remote At the sameTime Confirm with Button Confirm with the OK button Press Button Select the line ’Setup’ with Confirm withContinuous playback Sound playback without picture Press ButtonButton on the remote control Select line ’Sleep timer’ with Switch off function Sleep TimerSwitch on function WAKE-UP Timer Confirm with Button To end, pressBefore you call an engineer Technical terms used
Top Page Image Contents