Philips Operating Instructions Philips 21PV708-715-908/39, Safety instructions and other notes

Page 4

OPERATING INSTRUCTIONS PHILIPS 21PV708-715-908/39

Congratulations! You now own one of the most sophisticated and simple-to-use TV-VIDEO Combinations on the market. With this TV-VIDEO Combi you can record and play VHS-standard cassettes.

Please take the time to read this operating manual before using your TV-VIDEO Combi.

Safety instructions and other notes

Danger: High voltage!

Do not remove the top cover as there is a risk of an electrical shock!

The TV-VIDEO Combi does not contain any components that can be repaired by the customer. To switch off the TV-VIDEO Combi completely you must switch it off with the power switch.

Make sure that air can circulate freely through the ventilation slots on the TV-VIDEO Combi.

Make sure that no objects or liquids enter the TV-VIDEO Combi. If liquid is spilt into it, disconnect the TV-VIDEO Combi immediately from the power supply and call the After-sales Service for advice.

The TV-VIDEO Combi should not be used immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity.

After unpacking the TV-VIDEO Combi, it should be allowed to acclimatize for at least three hours before installation.

These operating instructions have been printed on nonpolluting paper.

Deposit old batteries at the relevant collection points.

Please make use of the facilities available in your country for disposing of the packaging of the TV-VIDEO Combi in a way that helps to protect the environment.

This electronic equipment contains many materials that can be recycled. Please inquire about the possibilities for recycling your old set.

SHOWVIEW is a registered trademark of Gemstar Development Corporation. SHOWVIEW is manufactured under licence from Gemstar Development Corporation.

So that you can identify your machine in the event of theft, enter the serial number (PROD.NO) here. The serial number is printed on the type plate fixed at the rear of the set.

MODEL NO.

21PV708-715-908/39

PROD.NO: . . . . . .

This product complies with the requirements of the Directive 73/23/EEC + 89/336/EEC + 93/68/EEC.

Technical information

Measurements in cm 708-715 (W/H/D): 51.0/50.5/48.2

Measurements in cm 908 (W/H/D): 52.4/52.0/48.0

Power consumption (Standby) : 65W (less than 4W)

Voltage : 198-264V 50Hz

Headphones : Output resistance less than 120 Ohms maximum output voltage more than 2.6V at 120 Ohms

Emergency interrupt

You can use the STANDBY button on the TV-VIDEO Combi or the remote control to interrupt any function. If you want to interrupt a running Timer recording, hold the STANDBY button for several seconds.

So if you are having operating problems, you can just interrupt the function and start again.

And you can practise operating your set without any worries. No matter which buttons you press, you cannot damage it.

1

Image 4
Contents Contents Remote control Operating Instructions in BriefFront of the set Back of the setSafety instructions and other notes Operating Instructions Philips 21PV708-715-908/39Technical information Emergency interruptSpecial functions on your TV-VIDEO Combi Connecting the cables Connecting Your TV-VIDEO CombiConnecting a decoder or other equipment Initial installation Installing Your TV-VIDEO CombiAllocating a decoder Channel setting. Important This re-tuning is only Manual TV channel searchSatellite receiver Select function ’ON’ withSpecial installation functions Automatic TV channel searchAllocating a channel number Searching for new TV channelsDelete a TV Channel Setting the time and date Setting the languageAutomatic time and date setting User guide OSD Important Notes for OperationMenu button Important notes for operation 9buttons or by inserting a cassette Button,TV SET Functions Selecting a preset sound setting Smart Sound Automatic volume control AVLHow to read Teletext Sound track selectionPlayback Functions Cleaning the video heads Picture interferenceTracking during playback Tracking during still pictureRecording with automatic switch-off OTR one-touch-recording Manual RecordingProtecting your recordings Auto-assembling’PDC’ Programme Delivery Control Programmed Recording TimerProgramming a recording with ’SHOWVIEW’ To end, press the Timer button Programming a recording without ’SHOWVIEW’Automatic recording from a satellite receiver SAT Recording Select the TV channel you want to record from PressHow to check or change a Timer How to clear a TimerChanging the TV system Parental control Additional FunctionsLine ’Video system’ select the required TV Switching to 169 wide screen picture Switching the On-screen display OSD on or offSelect the line ’Display’ with the menu buttons or z At the same Digit button 2 at the same time to switch the remoteTime Confirm with Button Select the line ’Setup’ with Confirm with Continuous playback Sound playback without pictureConfirm with the OK button Press Button Press ButtonSwitch off function Sleep Timer Switch on function WAKE-UP TimerButton on the remote control Select line ’Sleep timer’ with Confirm with Button To end, pressBefore you call an engineer Technical terms used