Philips 21PV708-715-908/39 manual Important notes for operation

Page 13

Important notes for operation

We suggest that, from now on, you switch off your TV-VIDEO Combi with the STANDBY button on the front of the set or on the remote control.

When the set is in the standby mode, a small red lamp at the front of the set will be alight.

You can switch on with the

P

or

0-9buttons or by inserting a cassette.

button, the

Attention: If you use the power switch h on the side panel, you switch off the set completely from the mains power supply. No programmed recordings will then be made. The red lamp at the front of the set will not be alight. After some time, the date and clock settings will be lost.

We advise you to keep your TV-VIDEO Combi connected to the mains at all times to ensure that programmed recordings can be made and that the television works normally. The power consumption will be low.

Attention: If you switch off the appliance with the power switch h , make sure that you have removed the tape by pressing the x button.

If you diconnect your TV-VIDEO Combi from the mains, TIMER and channel information will remain stored for about 1 year and clock information will remain stored for 30 minutes.

11

Image 13
Contents Contents Operating Instructions in Brief Remote controlBack of the set Front of the setOperating Instructions Philips 21PV708-715-908/39 Safety instructions and other notesTechnical information Emergency interruptSpecial functions on your TV-VIDEO Combi Connecting the cables Connecting Your TV-VIDEO CombiConnecting a decoder or other equipment Initial installation Installing Your TV-VIDEO CombiAllocating a decoder Manual TV channel search Channel setting. Important This re-tuning is onlySatellite receiver Select function ’ON’ withAutomatic TV channel search Special installation functionsAllocating a channel number Searching for new TV channelsDelete a TV Channel Setting the time and date Setting the languageAutomatic time and date setting User guide OSD Important Notes for OperationMenu button 9buttons or by inserting a cassette Button, Important notes for operationTV SET Functions Automatic volume control AVL Selecting a preset sound setting Smart SoundHow to read Teletext Sound track selectionPlayback Functions Picture interference Cleaning the video headsTracking during playback Tracking during still pictureManual Recording Recording with automatic switch-off OTR one-touch-recordingProtecting your recordings Auto-assembling’PDC’ Programme Delivery Control Programmed Recording TimerProgramming a recording with ’SHOWVIEW’ Programming a recording without ’SHOWVIEW’ To end, press the Timer buttonSelect the TV channel you want to record from Press Automatic recording from a satellite receiver SAT RecordingHow to clear a Timer How to check or change a TimerChanging the TV system Parental control Additional FunctionsLine ’Video system’ select the required TV Switching to 169 wide screen picture Switching the On-screen display OSD on or offSelect the line ’Display’ with the menu buttons or z At the same Digit button 2 at the same time to switch the remoteTime Confirm with Button Continuous playback Sound playback without picture Select the line ’Setup’ with Confirm withConfirm with the OK button Press Button Press ButtonSwitch on function WAKE-UP Timer Switch off function Sleep TimerButton on the remote control Select line ’Sleep timer’ with Confirm with Button To end, pressBefore you call an engineer Technical terms used