Philips 21PV708-715-908/39 manual Playback Functions

Page 16

5.PLAYBACK FUNCTIONS

Playing a cassette

aPut a cassette into the cassette slot.

b Press the

PLAY

 

button.

If you press the

 

button once, the TV-VIDEO

STOP

Combi will switch to pause. To stop, press the STOP button again.

To eject the cassette, press the x button on the TV-VIDEO Combi or press the STOP button on the remote control several seconds.

Before transportation, make sure that no cassette is in the TV-VIDEO Combi.

If you insert an erase protected cassette, the TV-VIDEO Combi will automatically start playback.

Some hired cassettes may have poor picture or sound quality. This is not a fault in your machine. Please read ’Eliminating picture interference’.

Some functions will automatically switch off after a while (for example, pause, still picture, picture search). This helps to protect the cassette and avoids wasting power.

Playing an NTSC cassette

With this set you can play cassettes that have been recorded on another video recorder in the NTSC standard (for example, American cassettes).

Some special features (for example, still picture) are not possible while you are playing an NTSC cassette.

Searching for tape position with the picture (picture search)

a While a cassette is playing, press the

 

 

(reverse) or

 

 

(forward) button once or several times.

 

 

b To stop at a certain picture, press the

 

 

button.

PLAY

 

 

 

During picture search, the picture quality may not be

 

 

so good and there will be no sound.

 

 

Still picture

a Press the

STILL

button. A still picture will appear on

the screen.

 

 

 

b Each time you press

 

 

again, the picture will

 

STILL

move on one step.

 

 

 

Slow motion

a Press the

STILL

button. A still picture will appear on

the screen.

 

 

 

 

b When you hold the

 

 

 

 

button, the tape will be

 

STILL

 

played in slow motion.

 

 

c When you press the

 

 

button several times, you have

 

 

a choice of several playback speeds. During slow motion there will be no sound.

Searching for tape position without the picture (wind and rewind)

a Stop the tape with the

STOP

button.

 

b Press the

 

(reverse) or

 

 

(forward) button.

 

 

 

c To stop at a certain picture, press the

 

button.

STOP

Tape position indication

Press the OK button to display the current tape position.

To change the type of tape position display, proceed as follows:

aDuring playback, press the MENU button.

b Select the line ’Tape’ with the menu buttons } or

z

and confirm with the

 

button.

cSelect the line ’Tape counter’ with the menu buttons } or z .

d With the menu buttons

or

select ’USED’ to

check the time used, or ’LEFT’ to check the time left on the tape.

e Confirm with the OK button.

Instant View

With this function you can switch to picture search during wind and rewind.

a If you hold the

 

(rewind) or

 

(wind) button

during wind or rewind, you will switch to picture search.

bWhen you release the button, the TV-VIDEO Combi will automatically switch back to rewind or wind.

Automatic search for a tape position (index search)

At the start of each recording, the TV-VIDEO Combi will write an index code on the tape.

a Press the

INDEX

button. Press the

 

button to

select the next code mark or the

 

button for the

 

previous code mark.

 

 

bWhen the TV-VIDEO Combi finds the code mark, it will automatically switch to play.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Contents Remote control Operating Instructions in BriefFront of the set Back of the setSafety instructions and other notes Operating Instructions Philips 21PV708-715-908/39Technical information Emergency interruptSpecial functions on your TV-VIDEO Combi Connecting the cables Connecting Your TV-VIDEO CombiConnecting a decoder or other equipment Initial installation Installing Your TV-VIDEO CombiAllocating a decoder Channel setting. Important This re-tuning is only Manual TV channel searchSatellite receiver Select function ’ON’ withSpecial installation functions Automatic TV channel searchAllocating a channel number Searching for new TV channelsDelete a TV Channel Setting the time and date Setting the languageAutomatic time and date setting User guide OSD Important Notes for OperationMenu button Important notes for operation 9buttons or by inserting a cassette Button,TV SET Functions Selecting a preset sound setting Smart Sound Automatic volume control AVLHow to read Teletext Sound track selectionPlayback Functions Cleaning the video heads Picture interferenceTracking during playback Tracking during still pictureRecording with automatic switch-off OTR one-touch-recording Manual RecordingProtecting your recordings Auto-assembling’PDC’ Programme Delivery Control Programmed Recording TimerProgramming a recording with ’SHOWVIEW’ To end, press the Timer button Programming a recording without ’SHOWVIEW’Automatic recording from a satellite receiver SAT Recording Select the TV channel you want to record from PressHow to check or change a Timer How to clear a TimerChanging the TV system Parental control Additional FunctionsLine ’Video system’ select the required TV Switching to 169 wide screen picture Switching the On-screen display OSD on or offSelect the line ’Display’ with the menu buttons or z At the same Digit button 2 at the same time to switch the remoteTime Confirm with Button Select the line ’Setup’ with Confirm with Continuous playback Sound playback without pictureConfirm with the OK button Press Button Press ButtonSwitch off function Sleep Timer Switch on function WAKE-UP TimerButton on the remote control Select line ’Sleep timer’ with Confirm with Button To end, pressBefore you call an engineer Technical terms used
Top Page Image Contents