Preventing accidental erasing

PLAY B-K

STOP C-L

FWD 1- B

PLAY B-K

Recording with automatic switch-off (OTR One-Touch-Recording)

1.Insert a cassette.

2.Use

to select the

PROG P+

PROG P–

0..9

programme number you want to record.

3.Press

REC I

4.Each time you press

you will add 30 min-

REC I

utes to the recording time.

5.To stop recording, press

STOP C-L

All cassettes (except rental and pre-recorded cassettes)

have a security tab on the back of the cassette. To prevent recording over important recordings (eras-

ing), you can remove this security tab.

If you later decide to record on a protected cassette, simply cover the hole with adhesive tape or slide the tab to the right.

Lining up recordings (assemble cut)

When you add a further recording to a cassette, which already has a recording on it, a short blank (flicker) can appear between the old and the new recording or the picture itself can flicker. To help reduce these from occurring, proceed as follows:

1.Find the tape position of the old recording where you want to insert the new recording.

2.Look at the last minute of the old recording (play-

back).

3.Press STILL 2 at the tape position where the

new recording is to go and press REC I .

4.Now start recording as usual by pressing REC I on the remote control.

5.Stop recording with STOP C-L .

Selecting the recording speed (SP or LP)

LP allows to double the recording duration on tape (for example six hours instead of three hours on a E180 cassette).

1.Press MENU . The main menu will appear.

2.Select 'RECORD SETUP' with PLAY B-KSTOP C-Land confirm with FWD 1- B .

3.Select 'RECORD SPEED' with PLAY B-K

STOP C-L .

SELECT K L CHOOSE B

→RECORD SPEED	[SP]
RECORD LINK	[OFF]

END=EXIT

4.Select the required recording speed with

FWD 1- B .

5.To end, press STATUS/EXIT .

'SP'/'LP' /'AUTO'

'SP': StandardPlay (normal recording speed) offers the usual first-class picture quality.

'LP': LongPlay (half recording speed, double recording time). 6 hours can be recorded on a 3-hour cassette (E180) with a somewhat reduced picture quality.

'AUTO': AUTOmatic Long Play. If there is not enough space on the tape to record a programmed recording in standard speed, the recording is automatically done in 'LP' (Longplay). Otherwise, the recording speed will be 'SP' (Standardplay).

Automatic controlled recording from a satellite receiver (RECORD LINK)

This function automatically starts recording on the switched-off TV-Video Combi when a video signal is recognised through the connected scart cable. If your satellite receiver has a programming function, the record- ing will start automatically (as long as the satellite receiv- er is switched on).

1.Press MENU . The main menu will appear.

2.Select 'RECORD SET UP' with

and confirm with 3.Select 'RECORD LINK' with

STOP C-L .


	SELECT K L CHOOSE B
	RECORD SPEED	[SP]
	→RECORD LINK	[OFF]
	END=EXIT


4.Select function 'ON' with			.
4.Select function 'ON' with		FWD 1- B	.

5.To end, press STATUS/EXIT .

6.Programme the satellite receiver with the required information (programme number of the TV channel, start time, end time).

If necessary, please see the operating instructions for your satellite receiver.

7.Insert a cassette.

The TV-Video Combi is now ready to record. The beginning and end of the recording is controlled via EXT1 socket.