3. Installing your TV-Video Combi
Preparation for use
Connecting additional devices
After you have connected additional devices (satellite receiver, etc.) through the aerial cable, switch them on. The automatic channel search will recognise them and save them.
1.After you have connected the aerial or cable, confirm the picture on the TV screen with 
.
2.The automatic TV channel search starts.
PLEASE WAIT
STARTFINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
When automatic TV channel search is com- plete,'AUTO TUNING COMPLETE' will appear on the TV screen.
3.'TIME' and 'DATE' will appear on the TV screen.
4.Check 'TIME'. If required, please change the time with the number buttons 0..9 .
TIME
DATE
SMART CLOCK [ON]
END=EXIT
5.Check if the displayed settings for 'DAY', 'MONTH' and 'YEAR' are correct.
6.When all information is correct, save by
pressing STATUS/EXIT .
The preparation for use is now complete.
Satellite receiver
If you are connecting a satellite receiver, please read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must install it as described in the next section.
Decoder allocation
Some TV channels transmit encoded TV signals which can only be viewed with a commercially purchased or rented decoder without distur- bances. You can connect such a decoder to this
1.Use | PROG P+ | , |
| PROG P– | or | 0..9 |
| to select the | |||||||||
TV channel which you would like to allocate | |||||||||||||||||
the decoder to. |
|
|
|
|
|
|
|
| |||||||||
2.Press |
| . The main menu will appear. | |||||||||||||||
MENU | |||||||||||||||||
3.Use |
|
|
|
|
|
|
|
|
|
| to select 'TUNER | ||||||
PLAY |
| STOP |
| ||||||||||||||
SET UP'. Then press |
|
|
|
|
|
|
|
| . | ||||||||
|
| FWD 1- B |
| ||||||||||||||
4.Use |
|
|
|
|
|
|
|
|
|
| to select 'MANUAL | ||||||
PLAY |
| STOP |
| ||||||||||||||
TUNING'. Then press |
|
|
|
|
|
|
|
| . | ||||||||
|
| FWD 1- B | |||||||||||||||
5.Use |
|
|
|
|
|
|
|
|
|
| to select | ||||||
PLAY |
| STOP |
| ||||||||||||||
MANUAL TUNING
PROG.
CHANNEL →DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
FWD 1- B to select 'ON'
(Decoder switched on).
How can I switch off the decoder?
Use FWD 1- B to select 'OFF' (Decoder switched off).
7.To end, press STATUS/EXIT .
The decoder has now been allocated to this TV channel.
EN
6