Playback | Philips 21PV375/07, 14PV375/07, 14PV374/07 specification

1.Press

2.Press

SMART Picture

You can change the picture setting during play-

back.
1.Press		to show the current pic-
	SMART PICTURE
ture setting.
2.Press		again to select the pic-
	SMART PICTURE

ture setting of your choice.

'NATURAL': best all-purpose-setting to watch a well-recorded tape (natural picture).

'SPORTS': accentuate the details. Valuable to watch high quality tapes or recorded sport

events.

'MOVIE': to get the best picture when you play a movie.

'WEAK SIGNAL': for rented tapes. It reduces the noise, making the picture more enjoyable.

'VIDEO GAMES': best setting when playing a video game.

Switch-off function (SLEEP TIMER)

You can programme your set to switch-off automati- cally after a predetermined period.

SLEEP .

SLEEP repeatedly to extend the time

until switch-off in 30 minute increments. The screen will show the time remaining until switch-off, e.g.: '+0:30'

The machine now counts backwards to the switch- off time.

The maximum time period to be set until switch- off is 2 hours.

If you would like to turn this function off, press SLEEP on the remote control several times until switch-off appears. '--:--' will appear on the screen. To check the time until switch-off, press SLEEP on the remote control.

If a recording is in process, switch-off function will be cancelled.

5. Playback

Playing cassettes

You can use this TV-Video Combi to playback record- ed VHS video cassettes. You can operate the TV- Video Combi using the remote control or the buttons on the set.

Your TV-Video Combi can only record and play stan- dard VHS cassettes.

1.Put a cassette into the cassette slot. The cas- sette is inserted automatically.

DIGITAL STUDIO PICTURE CONTROL

Philips has developed a system which produces the best possible playback quality. For old and often-used video cassettes, this system reduces interference. For new or high quality cassettes, it emphasises the details.

Picture/ sound quality is poor

When playing rental videos or older, poorer quality cassettes, it may not be possible to completely filter out picture and sound interference. This is not a fault in your machine. Read the section 'Manual tracking'.

2.Press PLAY B-Kto view the tape.

3.To stop the playback, press STOP C-Lor STOP/EJECT on the TV-Video Combi.

4.To eject the cassette, press EJECT A or STOP/EJECT when the TV-Video Combi stops the playback.

Do I need to change the playback speed when playing back LP recordings?

During playback, the correct speed will automatically be selected. For more information, please read the section 'Selecting the recording speed (SP or LP)' in the chapter 'Manual recording'.

Playing back NTSC cassettes

Cassettes that have been recorded in the NTSC standard (for example, American cassettes) can be played back using this TV-Video Combi.

Displaying current tape position

The following information is displayed on the screen: e.g.: 0:02:45 shows the counter in hours, minutes and seconds.

SP/LP: will show the recorded speed of your cassette

'REM 0:06': will show the actual amount of play- ing/recording time left on the tape in hours and minutes.

When you play an NTSC cassette, the TV-Video Combi will show 'REM -:--'.