Programming a recording Timer | Philips 21PV375/07, 14PV375/07

PLAY B-K

STOP C-L , select from the fol-

7. Programming a recording (TIMER)

General information

Use a TIMER programming to automatically start and stop a recording at a later time or date. The TV-Video Combi will switch to the right pro- gramme number and begin recording at the cor- rect time. With this TV-Video Combi, you can pre-programme up to eight recordings within a period of one year. To make a programmed recording, your TV-Video Combi needs to know: *the date you want to make the recording

*the programme number of the TV channel *the start and stop time of the recording *VPS or PDC on or off

This information is saved in a TIMER block.

What is 'VPS/PDC'?

'VPS' (Video Programming System)/ 'PDC' (Programme Delivery Control) are used to con- trol the start and duration of TV channel record- ings. If a TV programme starts earlier or ends later than scheduled, the TV-Video Combi will turn on and off at the correct time.

What do I need to know about 'VPS/PDC'?

Usually the VPS or PDC time is the same as the start time. But if your TV guide shows a VPS or PDC time which is different from the programme’s scheduled start time, e.g. 20.10 (VPS/PDC 20.14), you must enter the VPS/PDC time exact to the minute. If you want a start time different from the VPS/PDC time, you must switch VPS/PDC off.

Programming a recording with the 'VIDEO Plus+®' system

Thanks to this simplifed programming system, you no longer need to tediously enter the date, programme number, start and end time. All the information needed for programming is con- tained in the PlusCode number. You can find this PlusCode number in most TV listing magazines written next to the concerned programme. 1.Press SV/V+ on the remote control.

2.Enter the entire PlusCode number. This num- ber is up to 9 digits long and can be found next to the start time of the TV programme in your TV listing magazine. [e.g:1-234-5 or 1 234 5] If you make a mistake, you can clear

your input with CLEAR .

VIDEO Plus+ system

PlusCode No.

1 2 3 – – – – – –

SET=SV/V+

CORRECT=CLEAR

END=EXIT

3.Press SV/V+ .

4.Select ONCE, DAILY, or WEEKLY recording with PLAY B-K STOP C-L . Then press FWD 1- B .

VIDEO Plus+ system

→ONCE

DAILY WEEKLY

SELECT K L CHOOSE B

END=EXIT

Selecting once/daily/weekly recordings

Using lowing options:

'ONCE':	Recording once
'DAILY':	Repeated daily recordings (Monday
	to Friday)

'WEEKLY.': Repeated weekly recordings (every week on the same day)