Philips VRX342AT warranty Recording, Press the VCR button on the remote control

Page 29

Read and follow the steps below to record a television program.

1

Turn the TV on and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

Recording 29

1Turn on the TV.

2Insert a tape in the VCR.

2

Insert a tape with its record tab intact (see page five) in the VCR. The power will come on, and the Cassette-Inside light will appear.

3

Press the VCR button on the remote control.

4

3

5

POWER

VCR

TV

1 2 3

4 5 6

7 8 9

VCR PLUS+
/ENTER
	0	+100
SPEED	TIME SEARCH	MUTE
SPEED

CABLE /DSS

VCR/TV

CHANNEL

VOLUME

4

6

If the VCR light appears on the display panel of the VCR, go to step 5. If the VCR light does not appear, press the VCR/TV button once.

5

Press the (Tape) SPEED button on the remote control until the desired tape speed (see page 34) appears on the TV screen. The tape speed will disappear from the screen after about five seconds.

6

Use the CHANNEL (Up/Down) buttons or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button once to start recording. The REC light will appear.

8

To pause the recording (for example, during commer- cials), press the PAUSE/STILL button once. The REC light will flash. To start recording again, press the

REC(ord)/OTR button or the PAUSE/STILL button again. The REC light will come on again.

9

To stop recording, press the STOP button.

		PLAY			9
	– REW			F.FWD +	9
	– REW			F.FWD +
7		STOP			8
7	REC/OTR	MEMORY	SLOW	PAUSE/STILL	8
	MENU	STATUS/EXIT	CLEAR	EJECT

Helpful Hints

•If the REC(ord)/OTR button is pressed when there is not a tape in the VCR, NO CASSETTE will flash on-screen.

•If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on-screen.

•Other recording options are on pages 30 - 40.

•You can change the tape speed while the VCR is recording, but some distortion will appear on the tape.

•The VCR will record in a preset vol-

ume.

Image 29

Contents VRX342AT For Customer Use Dear Philips Magnavox product ownerSafety Precautions FeaturesIntroduction UseTable of Contents Using the Remote Control Putting Batteries in the Remote ControlVCR maintenance Remove the battery compartment lid on the bottomDisconnect the antenna or cable from your TV Hookups Without a Cable BoxPlug in the TV and the VCR Hookups Without a Cable Box cont’dHookups With a Cable Box Timer RecordingsRecording/Viewing Any Channel Watching TV With the VCR OffRecording One Channel/Watching Another Hookups With a Cable Box cont’dPlaying a Tape Press the Play button to play the tapeHookups With a Stereo TV 1Turn on the TV Turning on Your VCRChannel Memory Press the Number 3 button to select Tuner SET UPProgramming Channels Press the VCR buttonUse the Number buttons to enter the channel number Adding/Deleting ChannelsReviewing Programmed Channels Manual Clock Setting Setting the ClockPress the Number 4 button to select SET Clock Press the Number 2 button to select SET Manual ClockSetting the Clock cont’d Automatic Clock Setting Setting the Clock cont’dPress the VCR button, then press the Menu button to Bring up the main menu displayPress the Number 4 button to select SET Time Zone Time ZoneDaylight-Saving Time Selection Daylight-Saving Time SelectionLanguage Selection Press the Number 2 button to select VCR SET UPLanguage Selection Press the Number 3 button to select LanguagePress and release the Mute button TV Code SettingWithin 30 seconds after releasing the Mute button, press Release the TV buttonWithin 30 seconds after releasing the CABLE/DSS button, use Find the brand of your Cable Box or Satellite System onRelease the CABLE/DSS button Remote Control Buttons Remote Control Buttons cont’d To choose the status display mode, follow the steps below Press the Number 2 button to select on Screen ModeOn-Screen Status Displays VCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape PlayingRecording Press the VCR button on the remote controlPress the Stop button to stop the recording Recording One Channel/Watching AnotherWith the Tape Speed button Channels are programmedIntact and the tape is long enough to record the programs Buttons to select the channel you want to recordDaily Timer RecordingRecording Menu ScreenEnter the recording’s stop time Timer Recording cont’dTape Speeds Timer Recording cont’dPress the STATUS/EXIT button. Program WAS COM See page 46 for more hints Checking or Cancelling Timer RecordingsLocal TV Stations Call letters Setting Up the VCR Plus+ Programming SystemTV Channels Cable Channels Press the Number 4 button to select VCR PLUS+ REF. MAP Press the VCR button, then press the Menu buttonOnce Panel of the VCR. If it does not, press the VCR/TV buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat PlaybackTime Search Time SearchReal Time Counter Memory Real Time Counter MemoryForward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Helpful Hints Helpful Hints cont’d Cable Box Output Channel Channel 3 or GlossarySpecifications Renewed Index Supplied Accessories