Philips VRX342AT warranty Hookups With a Stereo TV

Page 10

10 Hookups With a Stereo TV

antenna or cable to ANT(enna) IN Jack

			ANT
			IN
AUDIO
OUT	IN		OUT
VIDEO		CH3	CH4
VIDEO

VIDEO (yellow) and AUDIO (white)

OUT Jacks

Video Cable

Audio Cable

●Audio and Video cables are not supplied.

Audio and Video IN Jacks on TV

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV.

(If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s left and right channels.)

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hint

• This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off).

Image 10

Contents VRX342AT Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions UseTable of Contents VCR maintenance Putting Batteries in the Remote ControlUsing the Remote Control Remove the battery compartment lid on the bottomHookups Without a Cable Box Disconnect the antenna or cable from your TVHookups Without a Cable Box cont’d Plug in the TV and the VCRRecording/Viewing Any Channel Timer RecordingsHookups With a Cable Box Watching TV With the VCR OffPlaying a Tape Hookups With a Cable Box cont’dRecording One Channel/Watching Another Press the Play button to play the tapeHookups With a Stereo TV Turning on Your VCR 1Turn on the TVProgramming Channels Press the Number 3 button to select Tuner SET UPChannel Memory Press the VCR buttonReviewing Programmed Channels Adding/Deleting ChannelsUse the Number buttons to enter the channel number Press the Number 4 button to select SET Clock Setting the ClockManual Clock Setting Press the Number 2 button to select SET Manual ClockSetting the Clock cont’d Press the VCR button, then press the Menu button to Setting the Clock cont’dAutomatic Clock Setting Bring up the main menu displayTime Zone Press the Number 4 button to select SET Time ZoneDaylight-Saving Time Selection Daylight-Saving Time SelectionLanguage Selection Press the Number 2 button to select VCR SET UPLanguage Selection Press the Number 3 button to select LanguageWithin 30 seconds after releasing the Mute button, press TV Code SettingPress and release the Mute button Release the TV buttonRelease the CABLE/DSS button Find the brand of your Cable Box or Satellite System onWithin 30 seconds after releasing the CABLE/DSS button, use Remote Control Buttons Remote Control Buttons cont’d On-Screen Status Displays Press the Number 2 button to select on Screen ModeTo choose the status display mode, follow the steps below VCR Display Panel Front Panel Rear Panel Playing Read and follow the steps below to play a tapePress the VCR button on the remote control RecordingRecording One Channel/Watching Another Press the Stop button to stop the recordingIntact and the tape is long enough to record the programs Channels are programmedWith the Tape Speed button Buttons to select the channel you want to recordRecording Menu Timer RecordingDaily ScreenTimer Recording cont’d Enter the recording’s stop timePress the STATUS/EXIT button. Program WAS COM Timer Recording cont’dTape Speeds Checking or Cancelling Timer Recordings See page 46 for more hintsTV Channels Cable Channels Setting Up the VCR Plus+ Programming SystemLocal TV Stations Call letters Press the VCR button, then press the Menu button Press the Number 4 button to select VCR PLUS+ REF. MAPPanel of the VCR. If it does not, press the VCR/TV button OnceTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Repeat Playback Repeat PlaybackTime Search Time SearchReal Time Counter Memory Real Time Counter MemorySuper High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel Channel 3 orSpecifications Renewed Index Supplied Accessories