Philips VRA611AT owner manual Hi-Fi Stereo Sound System, Please see additional notes on

40 Hi-Fi Stereo Sound System

Multi-Channel Television Sound system broadcasts are automatically recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the tapes recorded in Hi-Fi stereo, however, you’ll need to follow steps 1-5.

1	1
Press the VCR button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
VCR SET UP, then press the F.FWD/B button.

2-3

POWER	VCR/TV	EJECT
VCR	TV

	PLAY
REW		F.FWD
	STOP
MENU	STATUS/EXIT	CLEAR

SELECT op CHOOSE B
→ REPEAT PLAY	OFF

1 2 3

4 5 6

7 8 9

CH

ON SCREEN MODE

AUDIO OUT

LANGUAGE

BLUE BACKGROUND ON

TO END PUSH EXIT

ALT. CH

0VOL

SPEED	TIME SEARCH	PAUSE/STILL
REC/OTR	MEMORY	SLOW	MUTE

3

Press the PLAY/o button or the STOP/p button to select AUDIO OUT, then press the F.FWD/B button.

SELECT op
→ HIFI	ON
MONO
TO END PUSH EXIT

Helpful Hints

•All programs are automatically recorded in both Hi-Fi stereo sound and in monaural sound.

•The audio level of a tape recorded in Hi-Fi stereo will differ from the audio level of a tape not recorded in Hi-Fi stereo.

•Normally, HIFI should be selected from the AUDIO OUT menu for playback with Hi-Fi sound. But, you can change the selection to MONO if you want monaural audio play- back. To do this, follow steps 1-3. At step 4, press the PLAY/o button or the STOP/pbutton to select MONO. Press the STATUS/EXIT button. HIFI will disappear from the status display.

•If you play non-Hi-Fi tapes while the VCR is set to HIFI, HIFI will disap- pear from the status display and the tape will play in monaural sound.

Please see additional notes on page 43.