Fisher-Price P4266 owner manual Sidebar Cover, Tabs

Page 14

Sidebar Cover

Sidebar Cover

24

• Insert eight #8 x ¾" screws into the seat and tighten.

26

• Fit the sidebar covers onto the sidebars, as shown.

Hint: The sidebar covers are designed to fit one way. If a sidebar cover does not seem to fit, try the other one!

Tabs

25

Sidebar with	Sidebar with
Curve Out	Curve Out

•Insert a #8 x ¾" screw into each sidebar cover and tighten.

Front Fenders

•Fit the sidebars into the slots in the vehicle frame and rear fenders.

Hint: Each sidebar is designed to fit one way. Make sure the sidebar curves outward and the tabs on the ends fit into the slots in the vehicle and fenders.

27

• Fit the front fenders onto the front of the vehicle, as shown.

Hint: The front fenders are designed to fit one way. If a front fender does not seem to fit, try the other one!

14	P4266pr-0920

Image 14

Contents With Assembly Instructions For Model P4266 Table of Contents Important InformationElectrical Hazard Parts Bushings Front Axle Fastener Caps Rear Axle Caps 12V BatterySteering Wheel Cap Front Hubcaps Part Not Shown Label SheetParts Picture 1515 114Battery Charging Please callMotor Rear Axle AssemblyCharger Battery Connector Rear WheelFront Axle Rear Axle CapRear Hubcap Front Axle Fastener Cap Front WheelRim Slide a rim, indented side out, onto the front axleShock Post Slot ScrewTab Folded Folded Tab End Short Seat Belts Rear FendersDo not insert screws here Folded Long Seat BeltSidebar Cover TabsBumper Hood PegsAssembly Wrench Steering Column Post Bend Slot HoleSteering Column Lock Nut ScrewsSteering Wheel Steering Wheel CapDecoration Right Side View Power Wheels Volt Battery Battery InstallationBattery Door Motor HarnessBattery Care and Disposal CareSafe Driving Rules Riding HazardVehicle Operation RemoveLimited Warranty Vehicle CareProblems and Solutions Problem Possible Cause SolutionWall Operation of the drive system by raising the rear wheels off Before first-time use You must charge the battery Hours