Tail
15 | FRONT VIEW |
| |
|
|
|
|
• Fit the tail into the slots in the back end of the vehicle frame.
16
• Insert eight #8 x ¾" black screws into the tail and tighten.
Shock Post
Slot
17 | SIDE VIEW |
| |
|
| ||
|
|
|
|
•First, fit the bottom of a shock into the slot next to the tail.
•Then, slide the top of the shock onto the post on the tail.
DO NOT insert a screw here.
Screw
18
• Insert a #8 x ¾" screw into the hole in the shock and tighten.
Note: Do not insert a screw into the upper portion of the shock in this step. A screw will be assembled in this location in step 24.
•Repeat steps 17 and 18 to assemble the other shock to the other side of the vehicle.
12 |