Baby Sounds Activated, Swing Mode Switch

Baby Sounds Activated

Product features and decorations may vary from picture below.

Accessories sold separately.

SoundSensitivityDial

Music/VolumeSwitch

SpeedDial

Power

L.E.D.

SwingModeSwitch

Sound Sensitivity Dial

•Slide the switch to high sensitivity for incoming sounds (listens for shallow sounds).

•Slide the switch to low sensitivity for incoming sounds (listens only for loud sounds).

Hint: You may want to start with the high sensitivity setting at first.

Music/Volume Switch

•Select for music highest volume.

•Select for music high volume.

•Select for music low volume.

•Select to turn music off.

Speed Dial

• Select any of five speed settings.

Hint: As with most battery-powered swings, a heavier child will reduce the amount of swinging motion on all set- tings. In most cases, the low setting works best for a smaller child while the high setting works best for a larger child.

Swing Mode Switch

•Slide the switch to baby sounds activated. The power L.E.D. lights. The swing begins swinging for about

15-20 minutes and if you have selected music, five songs play (about 15-20 minutes). After swinging (and music) stop, the swing is ready to listen for your baby’s sounds for about two hours.

•When baby cries, the swing (and music, if selected) auto- matically turns on to soothe baby.

•If the swing is not activated (from baby’s sounds) within two hours of selection, the power L.E.D. flashes to tell you that it going to turn off. Once it has turned off (and the power

L.E.D. is not lit), you will need to slide the switch to the off

position and back to baby sounds activated. The swing is now re-set to listen for your baby’s sounds for another two hours.

•Be sure to turn the product off when not in use.