Fisher-Price G5175, B3469, B2108 manual Fit the grooves on the bracket to the seat tubes, as shown

Page 6

Assembly

M4 Lock Nut

Rounded Side

	Bracket
Shown Actual Size	Grooves
Shown Actual Size

Lock Nut	Tall
Lock Nut	End
	Seat
	Tubes
	Bottom
	Edge of
Hexagonal	Seat
Hexagonal
Opening

9

•Position the bracket so that the tall end is toward the bottom edge of the seat.

Hint: The M4 lock nuts have been assembled to the bracket at the factory. During shipment of this product, they may have fallen out. Check to be sure there is a lock nut in each hexagonal opening on the bracket. If one (or more) has fallen out, fit the lock nut into a hexagonal opening in the bracket. Make sure the rounded side of the lock nut is facing up.

• Fit the grooves on the bracket to the seat tubes, as shown.

Seat

Tubes

11

• Rotate the seat tubes down.

Seat Tubes

Bracket

Seat Wire

Bracket

Slot

10

M4 Screw - 4

Shown Actual Size

• Insert four M4 screws into the seat tubes and tighten.

12

• Fit the seat wire through the slot in the bracket as shown.

6

Image 6

Contents Smart Response Swing Model Number B2108, B3469, G5175Consumer Information Parts Assembly Set the frame assembly aside for Assembly step Fit the grooves on the bracket to the seat tubes, as shown Cap Seat Bottom Assembly Battery LatioTo tighten the restraint Securing Your ChildTighte n To loosen the restraintSeat Using Toy Using the TraySwing Modes Baby Sounds Activated Parent ActivatedSound Sensitivity Dial Music/Volume Switch Speed Dial Swing Mode SwitchBaby Sounds Activated Swing Mode Switch Speed Dial Music/Volume Switch Parent ActivatedTo remove the pad StorageCare To replace the padOne 1Year LimitedWarranty FCC Statement United States Only For other countries outside the United States